Re: [hylafax-users] Lots of errors: "Failed to properly detect hight-speed data carrier"

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2005.02.14 17:43 Rubin Bennett wrote:

> Feb 14 13:36:23.25: [25897]: RECV send MCF (message confirmation)
> Feb 14 13:36:23.25: [25897]: RECV FAX (000045035): from <UNSPECIFIED>,
> page 6 in 0:09, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
> Feb 14 13:36:24.56: [25897]: --> [2:OK]
> Feb 14 13:36:24.56: [25897]: <-- [11:AT+FRM=146\r]
> Feb 14 13:36:25.05: [25897]: --> [8:+FCERROR]
> Feb 14 13:36:25.05: [25897]: <-- [11:AT+FRM=146\r]
> Feb 14 13:36:29.00: [25897]: --> [8:+FCERROR]
> Feb 14 13:36:29.00: [25897]: <-- [11:AT+FRM=146\r]
> Feb 14 13:36:29.48: [25897]: --> [8:+FCERROR]
> Feb 14 13:36:29.48: [25897]: <-- [11:AT+FRM=146\r]
> Feb 14 13:36:33.74: [25897]: --> [8:+FCERROR]
> Feb 14 13:36:33.74: [25897]: <-- [11:AT+FRM=146\r]
> Feb 14 13:36:40.84: [25897]: --> [2:OK]
> Feb 14 13:36:40.85: [25897]: RECV FAX (000045035): from <UNSPECIFIED>,
> page 7 in 0:17, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
> Feb 14 13:36:40.85: [25897]: RECV FAX (000045035):
> recvq/fax000045055.tif from <UNSPECIFIED>, route to <unspecified>, 7
> pages in 1:46
> Feb 14 13:36:40.85: [25897]: RECV FAX: Failed to properly detect
> high-speed data carrier.

This shouldn't happen as frequently as 1 in 15 faxes.  For the 
frequency, I'd blame your RMIII.

As for the problem, it's possible that if the RMIII supports (and I 
don't recall if it does or not) AT+FAR=1 that HylaFAX could be enhanced 
to support that feature, and that would serve as a workaround that 
would probably help in at least some of these cases.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*