HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] High resolution document is not supported by client, image resolution 7.71654 lines/mm



Hi List again!

I've got this error once. After second trial the fax sent
successfully. Just I should like to know that why is it ?

[ Hylafax 4.2.1; debian; zyxel; rtscts; 19200 ]

It's the log:

Jan 18 11:34:53.64: [13760]: SESSION BEGIN 000003818
36*********
Jan 18 11:34:53.64: [13760]: HylaFAX (tm) Version 4.2.1
Jan 18 11:34:53.64: [13760]: SEND FAX: JOB 490 DEST
06******** COMMID
000003818 DEVICE '/dev/ttyS0'
Jan 18 11:34:53.65: [13760]: STATE CHANGE: RUNNING ->
SENDING
Jan 18 11:34:53.65: [13760]: sched policy=1, priority=1
Jan 18 11:34:53.65: [13760]: MODEM input buffering enabled
Jan 18 11:34:53.65: [13760]: <-- [12:AT+FCLASS=1\r]
Jan 18 11:34:53.78: [13760]: --> [2:OK]
Jan 18 11:34:53.79: [13760]: DIAL 06*********
Jan 18 11:34:53.79: [13760]: <-- [15:ATDT06**********\r]
Jan 18 11:35:04.72: [13760]: --> [7:CONNECT]
Jan 18 11:35:04.72: [13760]: MODEM input buffering disabled
Jan 18 11:35:06.12: [13760]: --> HDLC<23:FF C0 02 4A 82 9A
E2 9A 72 82
12 F2 22 04 92 CA C2 A2 0A 04 2A 82 42>
Jan 18 11:35:06.12: [13760]: --> [2:OK]
Jan 18 11:35:06.12: [13760]: REMOTE CSI "************"
Jan 18 11:35:06.12: [13760]: <-- [9:AT+FRH=3\r]
Jan 18 11:35:06.16: [13760]: --> [7:CONNECT]
Jan 18 11:35:06.53: [13760]: --> HDLC<7:FF C8 01 00 74 1F
00>
Jan 18 11:35:06.53: [13760]: --> [2:OK]
Jan 18 11:35:06.53: [13760]: REMOTE best rate 14400 bit/s
Jan 18 11:35:06.53: [13760]: REMOTE max A4 page width (215
mm)
Jan 18 11:35:06.53: [13760]: REMOTE max unlimited page
length
Jan 18 11:35:06.53: [13760]: REMOTE best vres 3.85 line/mm
Jan 18 11:35:06.53: [13760]: REMOTE best format 1-D MH
Jan 18 11:35:06.53: [13760]: REMOTE best 0 ms/scanline
Jan 18 11:35:06.53: [13760]: USE 14400 bit/s
Jan 18 11:35:06.53: [13760]: USE 0 ms/scanline
Jan 18 11:35:06.53: [13760]: SEND file
"docq/doc490.cover;c1"
Jan 18 11:35:06.53: [13760]: High resolution document is not
supported
by client, image resolution 7.71654 lines/mm
Jan 18 11:35:06.53: [13760]: <-- [9:AT+FTH=3\r]
Jan 18 11:35:07.56: [13760]: --> [7:CONNECT]
Jan 18 11:35:07.56: [13760]: <-- HDLC<3:FF C8 DF>
Jan 18 11:35:07.78: [13760]: --> [2:OK]
Jan 18 11:35:07.78: [13760]: MODEM input buffering enabled
Jan 18 11:35:07.78: [13760]: <-- [5:ATH0\r]
Jan 18 11:35:07.99: [13760]: --> [2:OK]
Jan 18 11:35:07.99: [13760]: MODEM set DTR OFF
Jan 18 11:35:07.99: [13760]: STATE CHANGE: SENDING ->
MODEMWAIT (timeout
5)
Jan 18 11:35:07.99: [13760]: sched policy=0, priority=0
Jan 18 11:35:07.99: [13760]: SESSION END

Thx!

Balázs


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions