Re: [hylafax-users] Adaptive Answer on a Intel V.92 Class 1 Modem

[George Bell <gbell5@xxxxxxx>]

On Tuesday 11 January 2005 08:03, Nestor A. Diaz L. wrote:
> Hello People.
>
> I am a happy user of Hylafax, i currently have installed it and works
> wonderful, a week ago i need to set up a fax modem with hylafax, and it
> works ok for fax only, however i need to set up adaptive answer on that
> modem, i have done it before with class 2.0 modems without problems, but i
> encontered a problem with a class 1 modem, since the commands i use to set
> up AA on Class 2.0 modems doesn't work with it, this is the modem profile:
>
> Fax Modem from Encore (http://www.encore-usa.com/product.php?id=30&lang=)
>
> AT+FCLASS=?
> 0,1,8
> ati1
> CD08.55 - 747 SERIAL - DSP PATCH: 3.26
> ati9
> AMB3100\12345678\MODEM\AMB3100\Intel V92 External Modem76
>
> The modem works ok for fax only, the only thing i have to change on the
> configuration file was:
>
> Class1SwitchingCmd:     "<delay:7>"
>
> In order to avoit the "Failure to receive silence."
>
> For data it works ok too, but i have not been able to configure the
> adaptive answer support
>
It is normally enabled with the command AT+FAA=1
Dou you have a line like:
ModemSetupAACmd:		AT+FAA=1
in your config file?

George



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*