[hylafax-users] Distinctive Ring Tones

[Glenn Lyons <glenn@xxxxxxxxxxxxxxxxxxxx>]

Hi All,

My understanding is that the command to enable Distinctive Ring
detection depends on the Modem's chipset and all are derived from three
generic chipsets.

CHIPSET			ENABLE		RESPONSE
3Com/USR/TI 		"ATS41=1"	RING A, RING B, RING C,... 
Rockwell/Conexant 	"AT-SDR=7	RING 1, RING 2, RING 3,...
Lucant/Agree		"AT+VDR=1,0	DRON xxx DROFF yyy

where xxx in the time the RING is on and yyy is time the RING is OFF.
The VDR parameters are param 1 is 0 or 1 for off or on and param 2 is
0 - n which is the time interval for the RING count and is usually
default of 100 millisecs.

As I said this is my best understanding and is not necessarily all
correct. 

I have tested two V90/92 models here. A SWANN SMART Turbo E120, and
DIAMOND VOICE 56SE. They are both Lucant types. Unfortunately, this is
the only mode of DR that hylafax does not support.

Has anyone got a patch or is anyone working on an update for this type
of distinctive ring response?

Glenn







____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*