Re: [hylafax-users] faxstat problem on FC2?

["Arnold.Steve" <arnold.steve@xxxxxxxxx>]

Howdy:

The hylafax 4.2.0 package on Gentoo provides nothing in /etc except an env file and an init script.  Pam is enabled via a USE flag, and I haven't seen any pam issues whatsoever (only tiff issues).  There's no hylafax pam config, and pam.d/other has only:

$ cat /etc/pam.d/other
#%PAM-1.0

auth       required     /lib/security/pam_deny.so

account    required     /lib/security/pam_deny.so

password   required     /lib/security/pam_deny.so

session    required     /lib/security/pam_deny.so

Hylafax access is typically controled by your /var/spool/fax/etc/hosts.hfaxd file.

Also, a sig 11 is very often hardware-related (ie, bad RAM, insufficient cooling, etc), although in this case it doesn't seem like it.  Have you tried rebuilding the Hylafax and/or pam rpms?  The last Hylafax rpms I built were for RedHat AS 2.1 and cAos (but it was version 4.1.8), however, you should be able to rebuild the 4.2.0 src.rpm on FC2 as well.

HTH, Steve

-----Original Message-----
From:	hylafax-users-bounce@xxxxxxxxxxx on behalf of Gerry Doris
Sent:	Fri 12/10/2004 5:46 AM
To:	support
Cc:	Joe Matuscak; hylafax-users@xxxxxxxxxxx
Subject:	Re: [hylafax-users] faxstat problem on FC2?
On Thu, 9 Dec 2004, support wrote:

> Hi,
> 
> Build it from source tarball. I have hylafax running on FC2
> successfully. make sure you have installed the modem device driver
> properly. Good luck!
> 
> 
> Thomas

I simply cannot get 4.2.0 with pam support working on my FC2 server.  If I 
disable pam support and compile it works fine.  With pam support the 
server disconnects immediately and I get a signal 11 in the log files.  
4.1.8 works flawlessly.

If you have 4.2.0 working with pam support will you please post your 
/etc/pam.d/other file and /etc/pam.d/hylafax file if you have one.

Thanks!

-- 
Gerry

"The lyfe so short, the craft so long to learne"  Chaucer

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*






____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*