HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] various receive errors with hylafax 4.2.0



Lee Howard wrote on 06/12/04 03:27 PM:

On 2004.12.03 14:00 marthter wrote:

The system is the same as described earlier in this thread:
Red Hat Linux release 9 (Linux 2.4.20-8)
hylafax-4.2.0 from .tar.gz plus last patch from http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=543
ati0 TP560 Data/Fax/Voice 56K Modem


Receiving from a certain sender, I had repeated problems today (6 attempts, ending up with 3 different error results).

RSPREC error/got DCN
No answer (T.30 T1 timeout) (how can it complain about no answer when this is on the receiving side!?)
RSPREC error/got DCN
T.30 T2 timeout, expected page not received
No answer (T.30 T1 timeout)
No answer (T.30 T1 timeout)


In the 4th one, the one that got the furthest, it e-mailed the PDF, but it was zero size. I didn't get a chance to look in received directory to see if the tiff was also zero size, though that seems likely given the "begin page" and "end page" were only 2/100 of a second apart.

Lee, can you do your babelfish magic from faxish to english? Is this noisy lines or something else I might have more control over?


Dec 03 15:33:52.80: [ 3455]: SESSION BEGIN 000000563 14164252922
Dec 03 15:33:52.80: [ 3455]: HylaFAX (tm) Version 4.2.0
Dec 03 15:33:52.84: [ 3455]: <-- [4:ATA\r]
Dec 03 15:34:00.25: [ 3455]: --> [7:CONNECT]
Dec 03 15:34:00.26: [ 3455]: ANSWER: FAX CONNECTION  DEVICE
'/dev/ttyS1'
Dec 03 15:34:00.27: [ 3455]: RECV FAX: begin
Dec 03 15:34:00.39: [ 3455]: <-- data [32]
Dec 03 15:34:00.39: [ 3455]: <-- data [2]
Dec 03 15:34:00.42: [ 3455]: --> [7:CONNECT]
Dec 03 15:34:00.42: [ 3455]: <-- data [23]
Dec 03 15:34:00.42: [ 3455]: <-- data [2]
Dec 03 15:34:00.45: [ 3455]: --> [7:CONNECT]
Dec 03 15:34:00.45: [ 3455]: <-- data [10]
Dec 03 15:34:00.45: [ 3455]: <-- data [2]
Dec 03 15:34:03.00: [ 3455]: --> [0:]
Dec 03 15:34:03.00: [ 3455]: MODEM <Empty line>


Notice that's still 2550 ms from the data transmission to the timeout. Are you sure the patch was applied properly? It should be 7550 ms before it times out.

Dec 03 15:39:46.15: [ 3455]: <-- [9:AT+FTH=3\r]
Dec 03 15:39:46.15: [ 3455]: --> [7:CONNECT]
Dec 03 15:39:46.15: [ 3455]: <-- data [32]
Dec 03 15:39:46.15: [ 3455]: <-- data [2]
Dec 03 15:39:46.19: [ 3455]: --> [7:CONNECT]
Dec 03 15:39:46.19: [ 3455]: <-- data [23]
Dec 03 15:39:46.19: [ 3455]: <-- data [2]
Dec 03 15:39:46.22: [ 3455]: --> [7:CONNECT]
Dec 03 15:39:46.22: [ 3455]: <-- data [10]
Dec 03 15:39:46.22: [ 3455]: <-- data [2]
Dec 03 15:39:48.71: [ 3455]: --> [2:OK]
Dec 03 15:39:48.71: [ 3455]: <-- [9:AT+FRH=3\r]
Dec 03 15:39:49.56: [ 3455]: --> [7:CONNECT]
Dec 03 15:39:51.46: [ 3455]: --> [2:OK]


You see, in this case it worked because the OK came before 2550 ms (2490 ms).

Lee.


Duh. Even though I built with the patch, I was too hurried to check the path and remove the old version. (That's what happens when you assume the make install from source will overwrite the rpm-installed binaries. Wrong.)


Thank you for your reply again Lee. I'll let you know how the patch really works shortly. I'll know with more certainty in a few days, since I'm expecting the most consistently problematic sender to be sending me something shortly.

Martin


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions