HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Limit Transmit Speed for VOIP faxes



On Mon, 6 Dec 2004 10:56:33 -0800 (PST), CG <cgg007@xxxxxxxxx> wrote:

>Hylafax 4.1.7 ...
>
>I'm trying to get HylaFax to use our VOIP line to fax out. I'm having a problem
>where the received fax is missing lines. Tech support said to lower the
>baudrate and try that. I see plenty of options in the documentation to set the
man sendfax:
  -B speed   
Try  to transmit facsimile documents using the desired sig-
nalling rate.  Possible speeds are: 2400, 4800, 7200, 9600,
12000,  14400,  16800,  19200,  21600, 24000, 26400, 28800,
31200, and 33600.  If the specified speed is  greater  than
the  transmitting  modem  or  receiver is capable of, it is
reduced to the highest possible speed both devices support.

That is equivalent to  DesiredSpeed   param in /etc/hylafax/hyla.conf

>Is there any better strategy for faxing over VOIP?
You could try upgrading to 2.0 which has error correction for class1/1.0
faxing.

-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions