[hylafax-users] Problems receiving faxes since upgrade to 4.2.0

[Nick Baird <nick.baird@xxxxxxxxxxxxx>]

I have been using Hylafax running on Gentoo linux with a US Robotics
Courier V.34 external modem.  Following an upgrade from version 4.1.8 to
4.2.0 I have started to get major problems receiving faxes.

Some faxes are getting through okay, but a large proportion aren't.
Looking at the logs, the following is very typical and is repeated
numeous times:

Nov 24 09:39:46.42: [ 1596]: SESSION BEGIN 000001386 4401452507409
Nov 24 09:39:46.42: [ 1596]: HylaFAX (tm) Version 4.2.0
Nov 24 09:39:46.42: [ 1596]: <-- [13:AT+FCLASS=1A\r]
Nov 24 09:39:51.80: [ 1596]: --> [7:CONNECT]
Nov 24 09:39:51.80: [ 1596]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Nov 24 09:39:51.80: [ 1596]: RECV FAX: begin
Nov 24 09:39:51.80: [ 1596]: <-- data [32]
Nov 24 09:39:51.80: [ 1596]: <-- data [2]
Nov 24 09:39:53.68: [ 1596]: --> [7:CONNECT]
Nov 24 09:39:53.68: [ 1596]: <-- data [23]
Nov 24 09:39:53.68: [ 1596]: <-- data [2]
Nov 24 09:39:54.84: [ 1596]: --> [7:CONNECT]
Nov 24 09:39:54.84: [ 1596]: <-- data [10]
Nov 24 09:39:54.84: [ 1596]: <-- data [2]
Nov 24 09:39:55.65: [ 1596]: --> [2:OK]
Nov 24 09:39:55.65: [ 1596]: <-- [9:AT+FRH=3\r]
Nov 24 09:39:58.75: [ 1596]: --> [0:]
Nov 24 09:39:58.75: [ 1596]: MODEM <Empty line>
Nov 24 09:39:58.75: [ 1596]: <-- data [1]
Nov 24 09:39:58.76: [ 1596]: --> [2:OK]
Nov 24 09:39:58.76: [ 1596]: DELAY 1500 ms
Nov 24 09:40:00.26: [ 1596]: <-- [9:AT+FTH=3\r]
Nov 24 09:40:00.37: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:00.37: [ 1596]: <-- data [32]
Nov 24 09:40:00.37: [ 1596]: <-- data [2]
Nov 24 09:40:02.35: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:02.35: [ 1596]: <-- data [23]
Nov 24 09:40:02.35: [ 1596]: <-- data [2]
Nov 24 09:40:03.51: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:03.51: [ 1596]: <-- data [10]
Nov 24 09:40:03.51: [ 1596]: <-- data [2]
Nov 24 09:40:04.32: [ 1596]: --> [2:OK]
Nov 24 09:40:04.32: [ 1596]: <-- [9:AT+FRH=3\r]
Nov 24 09:40:07.42: [ 1596]: --> [0:]
Nov 24 09:40:07.42: [ 1596]: MODEM <Empty line>
Nov 24 09:40:07.42: [ 1596]: <-- data [1]
Nov 24 09:40:07.43: [ 1596]: --> [2:OK]
Nov 24 09:40:07.43: [ 1596]: DELAY 1500 ms
Nov 24 09:40:08.93: [ 1596]: <-- [9:AT+FTH=3\r]
Nov 24 09:40:09.04: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:09.04: [ 1596]: <-- data [32]
Nov 24 09:40:09.04: [ 1596]: <-- data [2]
Nov 24 09:40:11.02: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:11.02: [ 1596]: <-- data [23]
Nov 24 09:40:11.02: [ 1596]: <-- data [2]
Nov 24 09:40:12.18: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:12.18: [ 1596]: <-- data [10]
Nov 24 09:40:12.18: [ 1596]: <-- data [2]
Nov 24 09:40:12.99: [ 1596]: --> [2:OK]
Nov 24 09:40:12.99: [ 1596]: <-- [9:AT+FRH=3\r]
Nov 24 09:40:16.09: [ 1596]: --> [0:]
Nov 24 09:40:16.09: [ 1596]: MODEM <Empty line>
Nov 24 09:40:16.09: [ 1596]: <-- data [1]
Nov 24 09:40:16.10: [ 1596]: --> [2:OK]
Nov 24 09:40:16.10: [ 1596]: DELAY 1500 ms
Nov 24 09:40:17.60: [ 1596]: <-- [9:AT+FTH=3\r]
Nov 24 09:40:17.71: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:17.71: [ 1596]: <-- data [32]
Nov 24 09:40:17.71: [ 1596]: <-- data [2]
Nov 24 09:40:19.69: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:19.69: [ 1596]: <-- data [23]
Nov 24 09:40:19.69: [ 1596]: <-- data [2]
Nov 24 09:40:20.85: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:20.85: [ 1596]: <-- data [10]
Nov 24 09:40:20.85: [ 1596]: <-- data [2]
Nov 24 09:40:21.66: [ 1596]: --> [2:OK]
Nov 24 09:40:21.66: [ 1596]: <-- [9:AT+FRH=3\r]
Nov 24 09:40:24.76: [ 1596]: --> [0:]
Nov 24 09:40:24.76: [ 1596]: MODEM <Empty line>
Nov 24 09:40:24.76: [ 1596]: <-- data [1]
Nov 24 09:40:24.77: [ 1596]: --> [2:OK]
Nov 24 09:40:24.77: [ 1596]: DELAY 1500 ms
Nov 24 09:40:26.27: [ 1596]: <-- [9:AT+FTH=3\r]
Nov 24 09:40:26.38: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:26.38: [ 1596]: <-- data [32]
Nov 24 09:40:26.38: [ 1596]: <-- data [2]
Nov 24 09:40:28.36: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:28.36: [ 1596]: <-- data [23]
Nov 24 09:40:28.36: [ 1596]: <-- data [2]
Nov 24 09:40:29.52: [ 1596]: --> [7:CONNECT]
Nov 24 09:40:29.52: [ 1596]: <-- data [10]
Nov 24 09:40:29.52: [ 1596]: <-- data [2]
Nov 24 09:40:30.33: [ 1596]: --> [2:OK]
Nov 24 09:40:30.33: [ 1596]: <-- [9:AT+FRH=3\r]
Nov 24 09:40:33.43: [ 1596]: --> [0:]
Nov 24 09:40:33.43: [ 1596]: MODEM <Empty line>
Nov 24 09:40:33.43: [ 1596]: <-- data [1]
Nov 24 09:40:33.44: [ 1596]: --> [2:OK]
Nov 24 09:40:33.44: [ 1596]: RECV FAX: No answer (T.30 T1 timeout)
Nov 24 09:40:33.44: [ 1596]: RECV FAX: end
Nov 24 09:40:33.44: [ 1596]: SESSION END

I saw a previous post about topic modems.  Is this the same problem, and
is the fix the same i.e. wait for 4.2.1, patch current source or grab
latest from CVS?

Thanks,

Nick.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*