Re: [hylafax-users] various receive errors with hylafax 4.2.0: COMREC received DCN this time

[marthter <marthter@xxxxxxxx>]

Lee Howard wrote  on 04/11/04 11:46 AM:

> On 2004.11.03 21:55 marthter wrote:
>
> > ati0 TP560 Data/Fax/Voice 56K Modem
> > ati1 Internal Controller Ver1.20, CheckSum=261B
> > ati4 DSP Ver1.10 CheckSum=05BA
> > AT+FMM? TP0001
> > AT+FMI? TP560 56K Data\Fax\Voice Modem
> > AT+FMR? Topic 56K VER:1.0
>
>
> > Nov 03 12:21:27.47: [ 3415]: SESSION BEGIN 000000523 [my number]
> > Nov 03 12:21:27.47: [ 3415]: HylaFAX (tm) Version 4.2.0
> > Nov 03 12:21:27.47: [ 3415]: <-- [4:ATA\r]
> > Nov 03 12:21:34.31: [ 3415]: --> [7:CONNECT]
> > Nov 03 12:21:34.31: [ 3415]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
> > Nov 03 12:21:34.31: [ 3415]: RECV FAX: begin
> > Nov 03 12:21:34.34: [ 3415]: --> [7:CONNECT]
> > Nov 03 12:21:34.37: [ 3415]: --> [7:CONNECT]
> > Nov 03 12:21:36.92: [ 3415]: --> [0:]
> > Nov 03 12:21:36.92: [ 3415]: MODEM <Empty line>
>
>
> A change in the 4.2.0 release broke functionality for Topic modems.
>
> See: http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=543
>
> You can apply the patch there to your 4.2.0 source and rebuild, get 
> CVS-HEAD, get someone to do one of the above for you, or you can wait 
> for 4.2.1.
>
> Lee.

Great thanks Lee.  I installed the 4.2.0 source from the .tar.gz file 
and added the patch from that bug.  Since I had used the RPM originally, 
I had to get a few more of the -devel RPMs and stuff, but eventually, 
configure worked.  I assumed you meant the last patch on that bug only, 
can you confirm?  It applied cleanly except for one spot where the 2550 
to 7550 change could not be done automatically because the second two 
lines of context did not match, so maybe the patch was made from a 
slightly older version of the source?

Anyway, after I manually made that last patch, it seemed to install and 
run fine.  I had to re-make that Transfer Encoding: base64 change and 
stuff but it looks to be running fine now.

So far, one test fax (from another Hylafax machine) has succeeded, so it 
is 1-for-1 with the patch.  I'll see how it goes over the next few days 
with other senders.

Thanks for your quick and knowledgeable reply.

Martin


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*