Re: [hylafax-users] Defining the MaxDials Parameter hylafax-4.2.0-1rh7 (RH7.3)

[Pedro Rocadas <procadas@xxxxxxxxx>]

Probably you want use this according with the
destination. See man destctrls

--- Shaun McCullagh <shaun@xxxxxxxxxx> wrote:

> Hi,
> 
> I finally figured this out. In my original message I
> should nhave 
> explained that I only use sendfax.
> 
> sendfax reads a config file called
> /etc/hylafax/sendfax.conf
> 
> So
> 
>         echo "MaxDials: 24" >
> /etc/hylafax/sendfax.conf
> 
> 
> Bingo Hylafax now tries to dial a remote fax 24
> times before aborting 
> the job....
> 
> Shaun
> 
> >  
> >
> >>Hi,
> >>
> >>I would like HylaFax to make 24 attempts to send a
> >>fax, but currently  
> >>it will not make more than 12 attempts. Here is my
> >>config file:
> >>
> >>/etc/hylafax/etc/config
> >>LogFacility:            local2
> >>CountryCode:            31
> >>AreaCode:               20
> >>LongDistancePrefix:     0
> >>InternationalPrefix:    00
> >>DialStringRules:        etc/dialrules
> >>ServerTracing:          1
> >>SessionTracing:         0x4f
> >>NoCarrierRetrys:        3               # retry 3
> >>times on no carrier
> >>MaxDials:               24               # Redial
> 24
> >>times before 
> >>discarding fax
> >>MaxTries:               6               # Attempt
> to
> >>send fax 6 times
> >>
> >>Is MaxDials defined in another config file?
> >>    
> >>
> >
> >  
> >
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com 
 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*