[hylafax-users] capi4hylafax (again) take 2 :)

[Gavin Hamill <gdh@xxxxxxxxxxxxxxxxxx>]

Hello :)

Apologies if this is the wrong place for capi4hylafax problems but I can't 
find any better place [1]

Quite simply, we have an Eicon DIVA Server 4BRI-8 card, HylaFAX 4.2.0, and 
capi4hylafax 01.02.03 (all from Debian sarge) and whilst I can successfully 
send a fax using 'c2sendfax' thus proving that the CAPI layer and config is 
working OK, HylaFAX always says

Modem faxCAPI (+44.161.835.2301): Waiting for modem to come ready

In the logs I see only this:
Oct 26 16:36:21 localhost FaxQueuer[2879]: HylaFAX (tm) Version 4.2.0
Oct 26 16:36:21 localhost FaxQueuer[2879]: Copyright (c) 1990-1996 Sam Leffler
Oct 26 16:36:21 localhost FaxQueuer[2879]: Copyright (c) 1991-1996 Silicon 
Graphics, Inc.
Oct 26 16:36:21 localhost HylaFAX[2881]: HylaFAX INET Protocol Server: 
restarted.
Oct 26 16:36:21 localhost FaxGetty[2883]: Syntax error at line 150, missing 
':' in "{"
Oct 26 16:36:21 localhost FaxGetty[2883]: Syntax error at line 290, missing 
':' in "    {"
Oct 26 16:36:21 localhost FaxGetty[2883]: Syntax error at line 395, missing 
':' in "    }"
Oct 26 16:36:21 localhost FaxGetty[2883]: Syntax error at line 396, missing 
':' in "}"
Oct 26 16:36:21 localhost FaxGetty[2883]: OPEN /dev/faxCAPI  HylaFAX (tm) 
Version 4.2.0
Oct 26 16:36:29 localhost FaxGetty[2883]: /dev/faxCAPI: Can not initialize 
modem.
Oct 26 16:37:44 localhost FaxGetty[2883]: Unable to setup modem 
on /dev/faxCAPI; giving up after 2 attempts
Oct 26 16:37:44 localhost FaxGetty[2883]: CLOSE /dev/faxCAPI
Oct 26 16:37:44 localhost FaxQueuer[2879]: MODEM /dev/faxCAPI appears to be 
wedged
Oct 26 16:37:44 localhost FaxQueuer[2879]: MODEM WEDGED: bin/wedged "faxCAPI" 
"/dev/faxCAPI"
Oct 26 16:37:44 localhost FaxQueuer[2879]: NOTIFY exit status: 0 (2906)

The log at /var/spool/hylafax/log/capi4hylafax contains no useful information, 
only the following each time the 'c2faxrecv' daemon is launched.

Oct 26 16:36:17.63: [ 2816]: c2faxrecv - INFO:
Device "faxCAPI" uses 2 receive thread(s) with the following config:
Oct 26 16:36:17.63: [ 2816]: c2faxrecv - INFO: Controller=1 : accept all
Oct 26 16:36:17.63: [ 2816]: c2faxrecv - INFO:

We only want to send faxes, but is it normal to have this constant status of 
'waiting for modem to come ready' ?

Cheers,
Gavin.

[1] I was unable to find the list referred to from 
http://www.hylafax.org/archive/2004-06/msg00154.php

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*