HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Unspecified Phase D error AND Ring detected without successful handshake !?



Hi!

 

I get this error and black page after some received faxes.

 

Debian; Hylafax 4.2.0; Class; rtscts; 19200; (libtiff4-3.6.1-1.1)

 

Maybe is the problem with libtiff ??

 

The log:

 

Oct 20 03:56:08.85: [28263]: SESSION BEGIN 000002178 ********

Oct 20 03:56:08.85: [28263]: HylaFAX (tm) Version 4.2.0

Oct 20 03:56:08.85: [28263]: <-- [4:ATA\r]

Oct 20 03:56:18.14: [28263]: --> [4:+FCO]

Oct 20 03:56:18.14: [28263]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'

Oct 20 03:56:18.14: [28263]: sched policy=1, priority=1

Oct 20 03:56:18.14: [28263]: RECV FAX: begin

Oct 20 03:56:18.14: [28263]: --> [20:+FCS:1,5,0,2,1,0,0,1]

Oct 20 03:56:18.14: [28263]: REMOTE wants 14400 bit/s

Oct 20 03:56:18.14: [28263]: REMOTE wants A4 page width (215 mm)

Oct 20 03:56:18.14: [28263]: REMOTE wants unlimited page length

Oct 20 03:56:18.14: [28263]: REMOTE wants 7.7 line/mm

Oct 20 03:56:18.14: [28263]: REMOTE wants 2-D MR

Oct 20 03:56:18.14: [28263]: --> [2:OK]

Oct 20 03:56:18.14: [28263]: <-- [7:AT+FDR\r]

Oct 20 03:56:23.43: [28263]: --> [20:+FCS:1,5,0,2,1,0,0,1]

Oct 20 03:56:23.43: [28263]: REMOTE wants 14400 bit/s

Oct 20 03:56:23.43: [28263]: REMOTE wants A4 page width (215 mm)

Oct 20 03:56:23.43: [28263]: REMOTE wants unlimited page length

Oct 20 03:56:23.43: [28263]: REMOTE wants 7.7 line/mm

Oct 20 03:56:23.43: [28263]: REMOTE wants 2-D MR

Oct 20 03:56:23.43: [28263]: --> [7:CONNECT]

Oct 20 03:56:23.43: [28263]: RECV: begin page

Oct 20 03:56:23.43: [28263]: RECV: send trigger 022

Oct 20 03:56:23.43: [28263]: <-- data [1]

Oct 20 03:56:23.43: [28263]: Copy quality checking performed by modem

Oct 20 03:56:41.60: [28263]: RECV: 32765 bytes of data, 1469 total lines

Oct 20 03:56:55.47: [28263]: RECV: 24872 bytes of data, 2294 total lines

Oct 20 03:56:56.76: [28263]: --> [16:+FPS:1,8F4,2,2,0]

Oct 20 03:56:56.76: [28263]: --> [6:+FET:0]

Oct 20 03:56:56.76: [28263]: RECV recv MPS (more pages, same document)

Oct 20 03:56:56.76: [28263]: --> [2:OK]

Oct 20 03:56:56.76: [28263]: RECV send MCF (message confirmation)

Oct 20 03:56:56.76: [28263]: RECV FAX (000002178): from , page 1 in 0:38, INF, 7.7 line/mm, 2-D MR, 14400 bit/s

Oct 20 03:56:56.76: [28263]: <-- [7:AT+FDR\r]

Oct 20 03:56:59.02: [28263]: --> [7:CONNECT]

Oct 20 03:56:59.02: [28263]: RECV: begin page

Oct 20 03:56:59.02: [28263]: RECV: send trigger 022

Oct 20 03:56:59.02: [28263]: <-- data [1]

Oct 20 03:56:59.02: [28263]: Copy quality checking performed by modem

Oct 20 03:56:59.02: [28263]: RECV: 14 bytes of data, 4 total lines

Oct 20 03:57:09.62: [28263]: --> [14:+FPS:1,2,0,0,0]

Oct 20 03:57:09.62: [28263]: --> [7:+FHS:A0]

Oct 20 03:57:09.62: [28263]: REMOTE HANGUP: Unspecified Phase D error (code A0)

Oct 20 03:57:09.62: [28263]: --> [5:ERROR]

Oct 20 03:57:09.63: [28263]: RECV keeping unconfirmed page

Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): from , page 2 in 0:13, INF, 7.7 line/mm, 2-D MR, 14400 bit/s

Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): recvq/fax000001516.tif from , route to <unspecified>, 2 pages in 0:51

Oct 20 03:57:09.63: [28263]: RECV FAX: Unspecified Phase D error

Oct 20 03:57:09.63: [28263]: RECV FAX (000002178): session with  terminated abnormally: Unspecified Phase D error

Oct 20 03:57:09.63: [28263]: RECV FAX: bin/faxrcvd "recvq/fax000001516.tif" "ttyS0" "000002178" "Unspecified Phase D error" "" ""

Oct 20 03:57:09.63: [28263]: sched policy=0, priority=0

Oct 20 03:57:09.63: [28263]: sched policy=1, priority=1

Oct 20 03:57:09.63: [28263]: RECV FAX: end

Oct 20 03:57:09.63: [28263]: SESSION END

 

It’s were the first page good and the second page black..

 

And another similar log:

 

Oct 20 15:45:27.10: [28263]: SESSION BEGIN 000002195 ********

Oct 20 15:45:27.10: [28263]: HylaFAX (tm) Version 4.2.0

Oct 20 15:45:27.10: [28263]: <-- [4:ATA\r]

Oct 20 15:45:36.83: [28263]: --> [4:+FCO]

Oct 20 15:45:36.83: [28263]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'

Oct 20 15:46:22.70: [28263]: RECV FAX (000002195): from ********, page 2 in 0:17, INF, 3.85 line/mm, 2-D MR, 14400 bit/s

Oct 20 15:46:22.70: [28263]: <-- [7:AT+FDR\r]

Oct 20 15:46:24.81: [28263]: --> [7:CONNECT]

Oct 20 15:46:24.81: [28263]: RECV: begin page

Oct 20 15:46:24.81: [28263]: RECV: send trigger 022

Oct 20 15:46:24.81: [28263]: <-- data [1]

Oct 20 15:46:24.81: [28263]: Copy quality checking performed by modem

Oct 20 15:46:24.81: [28263]: RECV: 14 bytes of data, 4 total lines

Oct 20 15:46:35.42: [28263]: --> [14:+FPS:1,2,0,0,0]

Oct 20 15:46:35.42: [28263]: --> [7:+FHS:A0]

Oct 20 15:46:35.42: [28263]: REMOTE HANGUP: Unspecified Phase D error (code A0)

Oct 20 15:46:35.42: [28263]: --> [5:ERROR]

Oct 20 15:46:35.42: [28263]: RECV keeping unconfirmed page

Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): from *******, page 3 in 0:13, INF, 3.85 line/mm, 2-D MR, 14400 bit/s

Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): recvq/fax000001525.tif from 4146412, route to <unspecified>, 3 pages in 0:59

Oct 20 15:46:35.42: [28263]: RECV FAX: Unspecified Phase D error

Oct 20 15:46:35.42: [28263]: RECV FAX (000002195): session with ******** terminated abnormally: Unspecified Phase D error

Oct 20 15:46:35.42: [28263]: RECV FAX: bin/faxrcvd "recvq/fax000001525.tif" "ttyS0" "000002195" "Unspecified Phase D error" "" ""

Oct 20 15:46:35.42: [28263]: sched policy=0, priority=0

Oct 20 15:46:35.42: [28263]: sched policy=1, priority=1

Oct 20 15:46:35.42: [28263]: RECV FAX: end

Oct 20 15:46:35.42: [28263]: SESSION END

 

The sender following trial:

 

Oct 20 15:55:28.18: [28272]: SESSION BEGIN 000002196 3614133461

Oct 20 15:55:28.18: [28272]: HylaFAX (tm) Version 4.2.0

Oct 20 15:55:28.18: [28272]: <-- [4:ATA\r]

Oct 20 15:56:28.88: [28272]: --> [10:NO CARRIER]

Oct 20 15:56:28.88: [28272]: ANSWER: Ring detected without successful handshake

Oct 20 15:56:28.88: [28272]: SESSION END

 

I get sometimes the „Ring detected without successful handshake” message..

Do you get sometimes this?

 

Could you help me? Thanks in advance..

 

Best Regards,

-Balázs




Project hosted by iFAX Solutions