[hylafax-users] What's the problem!? Unspecified Phase C error..

[Kónya Balázs <b.konya@xxxxxxxxxxx>]

Oct 14 14:06:55.31: [21484]: SESSION BEGIN 000000192 3614132361

Oct 14 14:06:55.31: [21484]: HylaFAX (tm) Version 4.2.0

Oct 14 14:07:05.02: [21484]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'

Oct 14 14:07:05.02: [21484]: STATE CHANGE: ANSWERING -> RECEIVING

Oct 14 14:07:05.02: [21484]: sched policy=1, priority=1

Oct 14 14:07:29.82: [21484]: RECV/CQ: Bad 1D pixel count, row 2280, got 0, expected 1728

Oct 14 14:07:29.82: [21484]: RECV/CQ: Bad 1D pixel count, row 2281, got 0, expected 1728

Oct 14 14:07:29.82: [21484]: RECV/CQ: Bad 1D pixel count, row 2282, got 0, expected 1728

Oct 14 14:07:34.07: [21484]: RECV FAX (000000192): from +36 1 256 4879, page 1 in 0:29, INF, 7.7 line/mm, 2-D MR, 14400 bit/s

Oct 14 14:07:34.07: [21484]: RECV FAX (000000192): recvq/fax000000141.tif from +36 1 256 4879, route to <unspecified>, 1 pages in 0:29

Oct 14 14:07:34.22: [21484]: RECV FAX (000000192): session with +36 1 256 4879 terminated abnormally: Unspecified Phase C error, including too much delay between TCF and +FDR command

Oct 14 14:07:34.22: [21484]: RECV FAX: bin/faxrcvd "recvq/fax000000141.tif" "ttyS0" "000000192" "Unspecified Phase C error, including too much delay between TCF and +FDR command" "" ""

Oct 14 14:07:34.22: [21484]: sched policy=0, priority=0

Oct 14 14:07:34.22: [21484]: sched policy=1, priority=1

Oct 14 14:07:34.22: [21484]: SESSION END

 

Debian Linux; Hylafax 4.2.0; Class 2.0

 

Can anybody help me ?