HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Problems with hylafax 4.2.0-1 and a zyxel u90e 1.13



nick wrote:

The problem is that faxgetty hangs.
The system is a redhat based distribution (e-smith 5.0 2.2.19-7.0.8 kernel).


Before I upgraded to 4.2 it was a 4.1.3 distrib, and would hang on almost any incoming fax (two would work, the third would stop after ANSWER: FAX CONNECTION. This only started occuring after I upgraded to the ZyXEL U90Es, beforehand it would block occasionaly.

It still does so, much less frequently, now it hangs every 20 faxes or so after stating ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1' . After that, nothing, no more messages are produced. I usually restart hylafax after 4 minutes without any new messages, (thank you for allowing the restarting of faxgetty with this command, it was annoying to have to kill -9 the PID). I can't tell much about what causes the process to hang, the redhat rpm doesn't seem to have logging enabled, or if it does, I can't find the logs.... (they're not in /var/spool/hylafax/logs)

Has anyone experienced this problem, I'll gladly supply any information I can to help me avoid this situation.

P.S. The machine and software are soon to be upgraded, but I'd like to be sure this problem doesn't tag along, if at all possible.

Nick


____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




As a followup to my post, here's a log of one of the failed sesions:

Sep 02 10:11:24.33: [ 5443]: SESSION BEGIN 00042873 39----899955 (for a little security)
Sep 02 10:11:24.33: [ 5443]: <-- [4:ATA\r]
Sep 02 10:11:33.89: [ 5443]: --> [4:+FCO]
Sep 02 10:11:33.89: [ 5443]: ANSWER: FAX CONNECTION
Sep 02 10:11:33.89: [ 5443]: RECV FAX: begin
Sep 02 10:11:34.17: [ 5443]: --> [27:+FTI:" +41 971 64 43"]
Sep 02 10:11:34.17: [ 5443]: REMOTE TSI "+41 971 64 43"
Sep 02 10:11:34.17: [ 5443]: --> [20:+FCS:0,5,0,2,1,0,0,1]
Sep 02 10:11:34.17: [ 5443]: REMOTE wants 14400 bit/s
Sep 02 10:11:34.17: [ 5443]: REMOTE wants page width 1728 pixels in 215 mm
Sep 02 10:11:34.17: [ 5443]: REMOTE wants unlimited page length
Sep 02 10:11:34.17: [ 5443]: REMOTE wants 3.85 line/mm
Sep 02 10:11:34.17: [ 5443]: REMOTE wants 2-D MR
Sep 02 10:11:34.17: [ 5443]: --> [2:OK]
Sep 02 10:11:34.17: [ 5443]: <-- [7:AT+FDR\r]
Sep 02 10:11:39.52: [ 5443]: --> [20:+FCS:0,5,0,2,1,0,0,1]
Sep 02 10:11:39.52: [ 5443]: REMOTE wants 14400 bit/s
Sep 02 10:11:39.52: [ 5443]: REMOTE wants page width 1728 pixels in 215 mm
Sep 02 10:11:39.52: [ 5443]: REMOTE wants unlimited page length
Sep 02 10:11:39.52: [ 5443]: REMOTE wants 3.85 line/mm
Sep 02 10:11:39.52: [ 5443]: REMOTE wants 2-D MR
Sep 02 10:11:39.52: [ 5443]: --> [7:CONNECT]
Sep 02 10:11:39.52: [ 5443]: RECV: begin page
Sep 02 10:11:39.52: [ 5443]: RECV: send trigger 022
Sep 02 10:11:39.52: [ 5443]: <-- data [1]
Sep 02 10:11:55.39: [ 5443]: RECV: 28372 bytes of data, 1128 total lines
Sep 02 10:23:02.88: [ 5443]: CLOSE /dev/ttyS1 <------- this is me restarting hylafax.


Again, I have an esmith server, it should be based up redhat 7.x kernel 2.2.19-7.0.8, no gcc (I used your compiled package hylafax-4.2.0-1rh7).

The modem is a zyxel U90E, firmware 1.13, configured with the default 2.0 settings.

Any suggestions are welcome...

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions