Re: [hylafax-users] Rockwell modem cards in Lucent TNT

[Pedro Rocadas <procadas@xxxxxxxxx>]

Set ServerTracing to 0xFFF in $HYLAFAX/etc/config and
send a log to the list, with modems configured in
Class1. 

Pedro

--- Tracy R Reed <treed@xxxxxxxxxxxxxxx> wrote:

> Hello all! I have been banging on this problem for a
> couple weeks and
> scouring google and have not yet come up with
> anything so I am getting
> desperate: I have a Lucent TNT box with a card of
> modems in it. The modems
> seem to be a Rockwell chipset. From all of my
> googling I seem to be the
> only person in the world using this device. I am
> using a perl script found
> on the net called PortRedirector to connect port
> 5001 on the TNT to a pty
> on a Linux Fedora 2 box so that Hylafax can talk to
> the modem through a
> normal tty interface. I had to specify the -8LE
> options to telnet in the
> perl script to get an 8 bit clean telnet connection.
> 
> I originally ran faxaddmodem on it and it configured
> it as a class 1 fax
> by default but it never worked very well.  It will
> not connect to several
> fax machines I need to send to, fails to negotiate
> (train) a particular
> speed with others, etc. I have tried it as a class 2
> fax and then it would
> connect to some of the faxes it could not connect to
> before and transmit a
> fax seemingly successfully but hylafax would still
> end the transmission
> with an error "Unspecified Transmit Phase C error".
> I have tried using the
> rockwell chipset configs that come with hylafax and
> when calling as a
> class 1 fax it often fails to negotiate a connection
> ending with "Failure
> to train remote modem at 2400 bps or minimum speed;
> too many attempts to
> dial" and when calling another modem a common
> failure is "Unable to set
> session parameters; too many attempts to dial". So
> my config is clearly
> screwy.
> 
> Here is a sequence from Hylafax's modem init using
> the auto-generated
> config:
> 
> Aug 15 23:04:20 lnx FaxGetty[30560]: <-- [5:ATE0\r]
> Aug 15 23:04:20 lnx FaxGetty[30560]: --> [4:ATE0]
> Aug 15 23:04:20 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:20 lnx FaxGetty[30560]: <-- [5:ATV1\r]
> Aug 15 23:04:21 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:21 lnx FaxGetty[30560]: <-- [5:ATQ0\r]
> Aug 15 23:04:21 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:21 lnx FaxGetty[30560]: <--
> [7:ATS0=0\r]
> Aug 15 23:04:22 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:22 lnx FaxGetty[30560]: <--
> [7:ATS8=2\r]
> Aug 15 23:04:22 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:22 lnx FaxGetty[30560]: <--
> [8:ATS7=60\r]
> Aug 15 23:04:22 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:22 lnx FaxGetty[30560]: <--
> [12:AT+FCLASS=?\r]
> Aug 15 23:04:23 lnx FaxGetty[30560]: --> [5:0,1,2]
> Aug 15 23:04:23 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:23 lnx FaxGetty[30560]: <--
> [12:AT+FCLASS=1\r]
> Aug 15 23:04:23 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:23 lnx FaxGetty[30560]: <-- [5:ATI3\r]
> Aug 15 23:04:24 lnx FaxGetty[30560]: --> [27:V5.8175
> RL56CSM/3 channel:2]
> Aug 15 23:04:24 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:24 lnx FaxGetty[30560]: <-- [5:ATI0\r]
> Aug 15 23:04:24 lnx FaxGetty[30560]: -->
> [16:Rockwell ARM CSM]
> Aug 15 23:04:24 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:24 lnx FaxGetty[30560]: <--
> [9:AT+FTM=?\r]
> Aug 15 23:04:24 lnx FaxGetty[30560]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
> Aug 15 23:04:24 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:24 lnx FaxGetty[30560]: <--
> [9:AT+FRM=?\r]
> Aug 15 23:04:25 lnx FaxGetty[30560]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
> Aug 15 23:04:25 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:25 lnx FaxGetty[30560]: <--
> [12:AT+FCLASS=1\r]
> Aug 15 23:04:25 lnx FaxGetty[30560]: --> [2:OK]
> Aug 15 23:04:25 lnx FaxGetty[30560]: MODEM V5.8175
> RL56CSM/3 CHANNEL:2
> Rockwell ARM CSM/
> 
> So I figure the last line has all of the
> chipset/model information. Does
> anyone have a working config for this or any
> suggestions on what I should
> try?
> 
> I could include my existing config here but it
> doesn't work and it's
> basically a copy of
> /var/spool/hylafax/config/rockwell-k56 or the
> generic
> class 1 or 2 faxmodem configs that came with
> hylafax.
> 
> -- 
> Tracy Reed                     The attachment is a
> digital signature.
> http://copilotconsulting.com   More info:
> http://copilotconsulting.com/sig
> 

> ATTACHMENT part 2 application/pgp-signature 




		
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*