![]() |
On Sun, 22 Aug 2004 12:42 am, Lee Howard wrote: > On 2004.08.21 05:34 Horst Simon wrote: > > Hi, > > > > I have two HylaFax 4.2 installations one on SuSE 9.1 and one on United > > Linux > > (SuSE 8.0), both use Hayes Optima modems, one is a Optima 288 and the > > other > > is an Optima 336. Both can send and receive from fax machines and I > > can send > > from the Optima 336 to the Optima 288, but sending from the optima 288 > > to the > > Optima 336 fails, both are configured as Class 1. I have attached > > following > > are the logs: > > > > Sender Optima 288: > > Aug 21 16:54:58.82: [23873]: SESSION BEGIN 000000014 61395531624 > > Aug 21 16:54:58.82: [23873]: HylaFAX (tm) Version 4.2.0 > > Aug 21 16:54:58.82: [23873]: SEND FAX: JOB 12 DEST 95531624 COMMID > > 000000014 > > DEVICE '/dev/ttyS0' > > Aug 21 16:54:58.82: [23873]: <-- [12:AT+FCLASS=1\r] > > Aug 21 16:54:59.11: [23873]: --> [2:OK] > > Aug 21 16:54:59.12: [23873]: DIAL 95531624 > > Aug 21 16:54:59.12: [23873]: <-- [13:ATDT95531624\r] > > Aug 21 16:55:20.84: [23873]: --> [7:CONNECT] > > Aug 21 16:55:21.46: [23873]: --> [5:ERROR] > > Aug 21 16:55:21.46: [23873]: MODEM Command error > > Aug 21 16:55:21.46: [23873]: FCS error > > If this is completely reproducible then something is wrong with the > Optima 288. It may, however, be a very limited problem. > > Lee. > On the retry the receiving modem Optima 336 got the Modem Command error followed by the FCS Error. If its of any help I can provide the logs and config files. Regards, Horst -- Horst Simon Tel: +61(0)3 9553-1624 Fax: +61(0)3 9553-1624 hsimon@xxxxxxxxxxxxxxx -------------------------------------------------------------- This message was sent by KMail 1.6.2 Using KDE 3.3 & SuSE Linux 9.1 ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*