HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] What is DID exactly?



Hi Steve.

On 2004.08.13 14:28 Steve Tuckner wrote:

3. Use a capability that your PBX may have (if you are using a PBX) to
route
multiple extensions to one station port. In this case, the PBX will
send
DTMF digits to the modem after it goes off-hook. I don't know if
Hylafax
supports this but if it doesn't support wouldn't be hard to add.

HylaFAX does support this already provided the modem can report DTMF digits to the DTE after an ATH1 or similar. The configuration is a bit tricky (documented in 'man hylafax-config'), but it is supported.


Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions