Re: [hylafax-users] distinctive ring?

["Kirk" <kirk@xxxxxxxxxxxxxxxxx>]

The output from minicom:
OK
AT+VDR=?
(0-1),(0-6)

OK

I'm anything but a modem buff so I have no clue as to what this tells me.
Do I have any options?

Kirk




>-----Original Message-----
>From: George Bell [mailto:gbell5@xxxxxxx]
>Sent: Monday, August 09, 2004 4:41 PM
>To: kirk@xxxxxxxxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
>Subject: Re: [hylafax-users] distinctive ring?
>
>On Monday 09 August 2004 09:35, Kirk wrote:
>> Sorry about not including the hardware and setup.  I have a Hayes Accura
>> v.92 modem model 15328.  So I use minicom to open up communication to the
>> modem and when I dial the distinctive ring number, the message from the
>> console say's 'RING'.  Both numbers actually display the same thing so I
>> tried to use the 'AT-SDR=7' but I get an error.  I have no problem going
>
>Just curious - what happens if you enter "AT+VDR=?" in minicom ?
>> out and buying another modem so if there's an 'ideal' model that I should
>> be using please advise.  But if we can get this current one working that
>> would be great.
>>
>> Any suggestions?
>>
>I have been using distinctive ring in Hylafax with a Multitech MT5634ZPX-
>PCI
>for the last 6 months or so without problems.   But since the MT sends
>DRON/DROFF codes for distinctive rings and Hylafax does not as yet support
>that, I wrote a patch for it which can be downloaded from the hylafax wiki
>website:  http://wiki.ifax.com/tiki-index.php and go to HowTo->Integration.
>
>General note:  Within a few weeks I'm hoping to release a new version of
>the
>patch to handle any arbitrary distinctive ring pattern.   The current
>version
>is known to work only within the U.S.
>
>George
>
>




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*