Re: [hylafax-users] CID number & Conceptronic C56EW

["Oscar I. del Rey" <informatica@xxxxxx>]

Hi again

I have try to modify my config.modem with:
    ModemResetCmds:       AT+VCID=1
    CIDNumber:            "NMBR="
    CIDName:              "NAME="
and there is no problem with hylafax starts... but when I am watching /var/log/messages
to debug the results, I don't see the Caller Id from anywhere
Is it possible that CID is not parsing to hylafax if the modem is behind
a PBX???

Regards


Lee Howard wrote:
> On 2004.08.09 04:40 Oscar I. del Rey wrote: 
> > Hi list 
> >     
> > I try to get CID numbers with a Conceptronic, model C56EW, to route  incoming
> > faxes. 
> > Hylafax has an example with the parameter CIDName "For example, for  the
> > ZyXEL U-1496 this parameter would be set to ``CALLER NAME: `'  (note the
> > trailing space)" , but I don't know what parameter is the  right to Conceptronic
> > modem. 
> >     
> > My telephone line supports CID 
> >     
> > Anyone can help me? 
> >     
>     
> Your modem manual should say how to 1) enable caller id, and 2)  identify
> the caller id responses. 
>     
> If the manual doesn't, then you'll need to figure it out through  debugging
> methods with faxgetty or perhaps minicom. 
>     
> Lee. 
>     
> ____________________ HylaFAX(tm) Users Mailing List _______________________ 
>     
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi 
>     
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null 
>     
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* 
>     
>