[hylafax-users] Hylafax with ISI5634PCI/8

[KY Lui <kylui@xxxxxxxxxx>]

Title: Hylafax with ISI5634PCI/8

Dear all,

ISI5634PCI/8 is configured as a Class 1 modem in Hylafax server under RedHat 8.0. Outbound fax document is successful but corrupted. Please find the log below:

Aug 09 16:54:17.86: [ 1162]: SESSION BEGIN 00000025 8521928986886
Aug 09 16:54:17.86: [ 1162]: HylaFAX (tm) Version 4.1.8
Aug 09 16:54:17.86: [ 1162]: DELAY 75 ms
Aug 09 16:54:17.94: [ 1162]: DELAY 2600 ms
Aug 09 16:54:21.55: [ 1162]: DELAY 10 ms
Aug 09 16:54:21.56: [ 1162]: <-- [4:ATZ\r]
Aug 09 16:54:22.47: [ 1162]: --> [2:OK]
Aug 09 16:54:22.47: [ 1162]: DELAY 3000 ms
Aug 09 16:54:25.47: [ 1162]: <-- [5:ATE0\r]
Aug 09 16:54:25.51: [ 1162]: --> [4:ATE0]
Aug 09 16:54:25.51: [ 1162]: --> [2:OK]
Aug 09 16:54:25.51: [ 1162]: <-- [5:ATV1\r]
Aug 09 16:54:25.55: [ 1162]: --> [2:OK]
Aug 09 16:54:25.55: [ 1162]: <-- [5:ATQ0\r]
Aug 09 16:54:25.59: [ 1162]: --> [2:OK]
Aug 09 16:54:25.59: [ 1162]: <-- [7:ATS0=0\r]
Aug 09 16:54:25.63: [ 1162]: --> [2:OK]
Aug 09 16:54:25.63: [ 1162]: <-- [7:ATS8=2\r]
Aug 09 16:54:25.68: [ 1162]: --> [2:OK]
Aug 09 16:54:25.68: [ 1162]: <-- [8:ATS7=60\r]
Aug 09 16:54:25.73: [ 1162]: --> [2:OK]
Aug 09 16:54:25.73: [ 1162]: <-- [12:AT+FCLASS=1\r]
Aug 09 16:54:25.79: [ 1162]: --> [2:OK]
Aug 09 16:54:25.79: [ 1162]: <-- [5:ATM0\r]
Aug 09 16:54:25.82: [ 1162]: --> [2:OK]
Aug 09 16:54:25.82: [ 1162]: <-- [12:AT+FCLASS=1\r]
Aug 09 16:54:25.97: [ 1162]: --> [2:OK]
Aug 09 16:54:26.00: [ 1162]: DIAL 9,28986886
Aug 09 16:54:26.00: [ 1162]: <-- [15:ATDT9,28986886\r]
Aug 09 16:54:37.79: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:39.62: [ 1162]: --> [2:OK]
Aug 09 16:54:39.62: [ 1162]: REMOTE NSF "00 00 21 01 4C 02 29 29 03 9F BE E1 01 0F 01 0E 01 01 01 2A 02 31 03 2E"
Aug 09 16:54:39.62: [ 1162]: NSF remote fax equipment: Oki Electric/Lanier
Aug 09 16:54:39.62: [ 1162]: <-- [9:AT+FRH=3\r]
Aug 09 16:54:39.66: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:39.85: [ 1162]: --> [2:OK]
Aug 09 16:54:39.85: [ 1162]: REMOTE best rate 9600 bit/s
Aug 09 16:54:39.85: [ 1162]: REMOTE max page width 1728 pixels in 215 mm
Aug 09 16:54:39.85: [ 1162]: REMOTE max unlimited page length
Aug 09 16:54:39.85: [ 1162]: REMOTE best vres 7.7 line/mm
Aug 09 16:54:39.85: [ 1162]: REMOTE best format 2-D MMR
Aug 09 16:54:39.85: [ 1162]: REMOTE supports T.30 Annex A, ECM
Aug 09 16:54:39.85: [ 1162]: REMOTE best 10 ms, 5 ms/scanline
Aug 09 16:54:39.85: [ 1162]: USE 9600 bit/s
Aug 09 16:54:39.85: [ 1162]: USE 10 ms, 5 ms/scanline
Aug 09 16:54:39.85: [ 1162]: SEND file "docq/doc22.ps;40"
Aug 09 16:54:39.85: [ 1162]: USE page width 1728 pixels in 215 mm
Aug 09 16:54:39.85: [ 1162]: USE unlimited page length
Aug 09 16:54:39.85: [ 1162]: USE 3.85 line/mm
Aug 09 16:54:39.85: [ 1162]: USE 2-D MR
Aug 09 16:54:39.85: [ 1162]: SEND training at v.29 9600 bit/s
Aug 09 16:54:39.85: [ 1162]: <-- [9:AT+FTH=3\r]
Aug 09 16:54:40.87: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:40.87: [ 1162]: <-- data [23]
Aug 09 16:54:40.88: [ 1162]: <-- data [2]
Aug 09 16:54:40.95: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:40.95: [ 1162]: <-- data [6]
Aug 09 16:54:40.96: [ 1162]: <-- data [2]
Aug 09 16:54:42.20: [ 1162]: --> [2:OK]
Aug 09 16:54:42.20: [ 1162]: <-- [9:AT+FTS=7\r]
Aug 09 16:54:42.29: [ 1162]: --> [2:OK]
Aug 09 16:54:42.29: [ 1162]: <-- [10:AT+FTM=96\r]
Aug 09 16:54:42.34: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:42.34: [ 1162]: <-- data [1024]
Aug 09 16:54:42.34: [ 1162]: <-- data [776]
Aug 09 16:54:42.34: [ 1162]: <-- data [2]
Aug 09 16:54:44.15: [ 1162]: --> [2:OK]
Aug 09 16:54:44.16: [ 1162]: <-- [9:AT+FRH=3\r]
Aug 09 16:54:44.43: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:45.66: [ 1162]: --> [2:OK]
Aug 09 16:54:45.66: [ 1162]: TRAINING succeeded
Aug 09 16:54:45.66: [ 1162]: DELAY 75 ms
Aug 09 16:54:45.73: [ 1162]: <-- [10:AT+FTM=96\r]
Aug 09 16:54:45.79: [ 1162]: --> [7:CONNECT]
Aug 09 16:54:45.79: [ 1162]: SEND begin page
Aug 09 16:54:45.79: [ 1162]: <-- data [1026]
Aug 09 16:54:45.79: [ 1162]: <-- data [1033]
Aug 09 16:54:45.79: [ 1162]: <-- data [1025]
Aug 09 16:54:45.79: [ 1162]: <-- data [1031]
Aug 09 16:54:45.94: [ 1162]: <-- data [1029]
Aug 09 16:54:45.94: [ 1162]: <-- data [1033]
Aug 09 16:54:45.94: [ 1162]: <-- data [1037]
Aug 09 16:54:45.94: [ 1162]: <-- data [1032]
Aug 09 16:54:46.09: [ 1162]: <-- data [1029]
Aug 09 16:54:46.09: [ 1162]: <-- data [1025]
Aug 09 16:54:46.09: [ 1162]: <-- data [1031]
Aug 09 16:54:46.09: [ 1162]: <-- data [1035]
Aug 09 16:54:48.49: [ 1162]: <-- data [1032]
Aug 09 16:54:48.49: [ 1162]: <-- data [272]
Aug 09 16:54:48.49: [ 1162]: SENT 13584 bytes of data
Aug 09 16:54:48.49: [ 1162]: <-- data [1025]
Aug 09 16:54:48.49: [ 1162]: <-- data [1027]
Aug 09 16:54:48.49: [ 1162]: <-- data [1029]
Aug 09 16:54:50.87: [ 1162]: <-- data [1031]
Aug 09 16:54:50.87: [ 1162]: <-- data [1027]
Aug 09 16:54:50.87: [ 1162]: <-- data [1042]
Aug 09 16:54:50.87: [ 1162]: <-- data [1030]
Aug 09 16:54:51.03: [ 1162]: <-- data [1027]
Aug 09 16:54:51.03: [ 1162]: <-- data [1031]
Aug 09 16:54:51.03: [ 1162]: <-- data [1042]
Aug 09 16:54:51.03: [ 1162]: <-- data [1029]
Aug 09 16:54:53.41: [ 1162]: <-- data [1024]
Aug 09 16:54:53.41: [ 1162]: <-- data [1036]
Aug 09 16:54:53.41: [ 1162]: <-- data [380]
Aug 09 16:54:53.41: [ 1162]: SENT 13689 bytes of data
Aug 09 16:54:53.41: [ 1162]: <-- data [1029]
Aug 09 16:54:53.41: [ 1162]: <-- data [1025]
Aug 09 16:54:55.80: [ 1162]: <-- data [578]
Aug 09 16:54:55.80: [ 1162]: SENT 2621 bytes of data
Aug 09 16:54:55.80: [ 1162]: SEND 2D RTC
Aug 09 16:54:55.80: [ 1162]: <-- data [30]
Aug 09 16:54:55.80: [ 1162]: <-- data [2]
Aug 09 16:54:55.80: [ 1162]: SEND end page
Aug 09 16:55:02.56: [ 1162]: --> [2:OK]
Aug 09 16:55:02.56: [ 1162]: <-- [9:AT+FTS=9\r]
Aug 09 16:55:02.68: [ 1162]: --> [2:OK]
Aug 09 16:55:02.68: [ 1162]: SEND send EOP (no more pages or documents)
Aug 09 16:55:02.68: [ 1162]: <-- [9:AT+FTH=3\r]
Aug 09 16:55:03.71: [ 1162]: --> [7:CONNECT]
Aug 09 16:55:03.71: [ 1162]: <-- data [3]
Aug 09 16:55:03.71: [ 1162]: <-- data [2]
Aug 09 16:55:04.23: [ 1162]: --> [2:OK]
Aug 09 16:55:04.23: [ 1162]: <-- [9:AT+FRH=3\r]
Aug 09 16:55:04.29: [ 1162]: --> [7:CONNECT]
Aug 09 16:55:05.43: [ 1162]: --> [2:OK]
Aug 09 16:55:05.43: [ 1162]: SEND recv MCF (message confirmation)
Aug 09 16:55:05.43: [ 1162]: SEND FAX (00000025): FROM kylui@xxxxxxxxxx TO 9,28986886 (page 1 of 1 sent in 0:26)
Aug 09 16:55:05.43: [ 1162]: SEND FAX (00000025): FROM kylui@xxxxxxxxxx TO 9,28986886 (docq/doc22.ps;40 sent in 0:26)
Aug 09 16:55:05.43: [ 1162]: <-- [9:AT+FTH=3\r]
Aug 09 16:55:06.43: [ 1162]: --> [7:CONNECT]
Aug 09 16:55:06.43: [ 1162]: <-- data [3]
Aug 09 16:55:06.43: [ 1162]: <-- data [2]
Aug 09 16:55:06.95: [ 1162]: --> [2:OK]
Aug 09 16:55:06.95: [ 1162]: <-- [5:ATH0\r]
Aug 09 16:55:07.14: [ 1162]: --> [2:OK]
Aug 09 16:55:07.14: [ 1162]: SESSION END