HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Modem Problem w/ failed reset, not releasing DID line



See attached log..

Having problem w/ the modem not being reset properly after a failed incoming fax call.. These are DID lines.. modem is MT5634ZBA-DID latest firmware.
heres my reset strings/soft reset/etc.. can post full config if needed..


anyone ever seen this problem?

Thanks, Aaron


ModemResetCmds: AT&F*DS1*DD0*DF1*DN4\N0+VCID=1 ModemModemSoftResetCmd AT&F*DS1*DD0*DF1*DN4\N0+VCID=1 ModemSoftResetCmdDelay: 0 ModemResetDelay: 0 CIDNumber: "DTMF" # format of AT*DF1 CIDNumberAnswerLength: 4

Thanks, Aaron
--
Spydernet has scanned this message for viruses and
dangerous content.

Aug 06 16:59:41.28: [19586]: SESSION BEGIN 000000219 19035819359
Aug 06 16:59:41.28: [19586]: HylaFAX (tm) Version 4.1.8
Aug 06 16:59:41.28: [19586]: <-- [4:ATA\r]
Aug 06 16:59:49.96: [19586]: --> [7:CONNECT]
Aug 06 16:59:49.96: [19586]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS5'
Aug 06 16:59:49.96: [19586]: RECV FAX: begin
Aug 06 16:59:49.96: [19586]: <-- data [23]
Aug 06 16:59:49.96: [19586]: <-- data [2]
Aug 06 16:59:49.99: [19586]: --> [7:CONNECT]
Aug 06 16:59:49.99: [19586]: <-- data [10]
Aug 06 16:59:49.99: [19586]: <-- data [2]
Aug 06 16:59:51.24: [19586]: --> [2:OK]
Aug 06 16:59:51.24: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 16:59:54.34: [19586]: --> [0:]
Aug 06 16:59:54.34: [19586]: MODEM <Empty line>
Aug 06 16:59:54.34: [19586]: <-- data [1]
Aug 06 16:59:54.35: [19586]: --> [2:]
Aug 06 16:59:54.35: [19586]: --> [2:OK]
Aug 06 16:59:54.35: [19586]: DELAY 1500 ms
Aug 06 16:59:55.85: [19586]: <-- [9:AT+FTH=3\r]
Aug 06 16:59:56.82: [19586]: --> [7:CONNECT]
Aug 06 16:59:56.82: [19586]: <-- data [23]
Aug 06 16:59:56.82: [19586]: <-- data [2]
Aug 06 16:59:56.85: [19586]: --> [7:CONNECT]
Aug 06 16:59:56.85: [19586]: <-- data [10]
Aug 06 16:59:56.85: [19586]: <-- data [2]
Aug 06 16:59:58.12: [19586]: --> [2:OK]
Aug 06 16:59:58.12: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 17:00:01.22: [19586]: --> [0:]
Aug 06 17:00:01.22: [19586]: MODEM <Empty line>
Aug 06 17:00:01.22: [19586]: <-- data [1]
Aug 06 17:00:01.23: [19586]: --> [2:]
Aug 06 17:00:01.23: [19586]: --> [2:OK]
Aug 06 17:00:01.23: [19586]: DELAY 1500 ms
Aug 06 17:00:02.73: [19586]: <-- [9:AT+FTH=3\r]
Aug 06 17:00:03.70: [19586]: --> [7:CONNECT]
Aug 06 17:00:03.70: [19586]: <-- data [23]
Aug 06 17:00:03.70: [19586]: <-- data [2]
Aug 06 17:00:03.73: [19586]: --> [7:CONNECT]
Aug 06 17:00:03.73: [19586]: <-- data [10]
Aug 06 17:00:03.73: [19586]: <-- data [2]
Aug 06 17:00:05.00: [19586]: --> [2:OK]
Aug 06 17:00:05.00: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 17:00:08.10: [19586]: --> [0:]
Aug 06 17:00:08.10: [19586]: MODEM <Empty line>
Aug 06 17:00:08.10: [19586]: <-- data [1]
Aug 06 17:00:08.11: [19586]: --> [2:]
Aug 06 17:00:08.11: [19586]: --> [2:OK]
Aug 06 17:00:08.11: [19586]: DELAY 1500 ms
Aug 06 17:00:09.61: [19586]: <-- [9:AT+FTH=3\r]
Aug 06 17:00:10.58: [19586]: --> [7:CONNECT]
Aug 06 17:00:10.58: [19586]: <-- data [23]
Aug 06 17:00:10.58: [19586]: <-- data [2]
Aug 06 17:00:10.61: [19586]: --> [7:CONNECT]
Aug 06 17:00:10.61: [19586]: <-- data [10]
Aug 06 17:00:10.61: [19586]: <-- data [2]
Aug 06 17:00:11.88: [19586]: --> [2:OK]
Aug 06 17:00:11.88: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 17:00:14.98: [19586]: --> [0:]
Aug 06 17:00:14.98: [19586]: MODEM <Empty line>
Aug 06 17:00:14.98: [19586]: <-- data [1]
Aug 06 17:00:14.99: [19586]: --> [2:]
Aug 06 17:00:14.99: [19586]: --> [2:OK]
Aug 06 17:00:14.99: [19586]: DELAY 1500 ms
Aug 06 17:00:16.49: [19586]: <-- [9:AT+FTH=3\r]
Aug 06 17:00:17.46: [19586]: --> [7:CONNECT]
Aug 06 17:00:17.46: [19586]: <-- data [23]
Aug 06 17:00:17.46: [19586]: <-- data [2]
Aug 06 17:00:17.49: [19586]: --> [7:CONNECT]
Aug 06 17:00:17.49: [19586]: <-- data [10]
Aug 06 17:00:17.49: [19586]: <-- data [2]
Aug 06 17:00:18.76: [19586]: --> [2:OK]
Aug 06 17:00:18.76: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 17:00:21.86: [19586]: --> [0:]
Aug 06 17:00:21.86: [19586]: MODEM <Empty line>
Aug 06 17:00:21.86: [19586]: <-- data [1]
Aug 06 17:00:21.87: [19586]: --> [2:]
Aug 06 17:00:21.87: [19586]: --> [2:OK]
Aug 06 17:00:21.87: [19586]: DELAY 1500 ms
Aug 06 17:00:23.37: [19586]: <-- [9:AT+FTH=3\r]
Aug 06 17:00:24.34: [19586]: --> [7:CONNECT]
Aug 06 17:00:24.34: [19586]: <-- data [23]
Aug 06 17:00:24.34: [19586]: <-- data [2]
Aug 06 17:00:24.37: [19586]: --> [7:CONNECT]
Aug 06 17:00:24.37: [19586]: <-- data [10]
Aug 06 17:00:24.37: [19586]: <-- data [2]
Aug 06 17:00:25.64: [19586]: --> [2:OK]
Aug 06 17:00:25.64: [19586]: <-- [9:AT+FRH=3\r]
Aug 06 17:00:28.74: [19586]: --> [0:]
Aug 06 17:00:28.74: [19586]: MODEM <Empty line>
Aug 06 17:00:28.74: [19586]: <-- data [1]
Aug 06 17:00:28.75: [19586]: --> [2:]
Aug 06 17:00:28.75: [19586]: --> [2:OK]
Aug 06 17:00:28.75: [19586]: RECV FAX: No answer (T.30 T1 timeout)
Aug 06 17:00:28.75: [19586]: RECV FAX: end
Aug 06 17:00:28.75: [19586]: SESSION END

Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.262 / Virus Database: 264.3.0 - Release Date: 8/4/2004



Project hosted by iFAX Solutions