HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Error parsing "+FTM"

Here is the error log I noticed this time it is an "+FRM" error but I am getting both frequently but I have now noticed it does not always lock up the modem.

 

Jul 28 13:59:06 APS-Hustn-FxSvr FaxGetty[15461]: STATE CHANGE: RUNNING -> LISTENING

Jul 28 13:59:06 APS-Hustn-FxSvr FaxGetty[15461]: MODEM input buffering enabled

Jul 28 13:59:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [4:RING]

Jul 28 13:59:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [11:DATE = 0728]

Jul 28 13:59:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [11:TIME = 1358]

Jul 28 13:59:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [17:NMBR = ]

Jul 28 13:59:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [22:NAME = SOUTHFIELD HEAL]

Jul 28 13:59:12 APS-Hustn-FxSvr FaxGetty[15461]: --> [4:RING]

Jul 28 13:59:12 APS-Hustn-FxSvr FaxGetty[15461]: ANSWER: CID NUMBER " " NAME " SOUTHFIELD HEAL"

Jul 28 13:59:12 APS-Hustn-FxSvr FaxGetty[15461]: STATE CHANGE: LISTENING -> ANSWERING

Jul 28 13:59:12 APS-Hustn-FxSvr FaxGetty[15461]: MODEM input buffering enabled

Jul 28 13:59:18 APS-Hustn-FxSvr FaxGetty[15461]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS7'

Jul 28 13:59:55 APS-Hustn-FxSvr FaxGetty[15461]: RECV FAX (000000363): from , page 1 in 0:30, INF, 3.85 line/mm, 1-D MH, 9600 bit/s

Jul 28 13:59:55 APS-Hustn-FxSvr FaxGetty[15461]: RECV FAX (000000363): recvq/fax000000355.tif from , route to <unspecified>, 1 pages in 0:37

Jul 28 13:59:57 APS-Hustn-FxSvr FaxGetty[15461]: RECV FAX: bin/faxrcvd "recvq/fax000000355.tif" "ttyS7" "000000363" "" " 7139474348" " SOUTHFIELD HEAL"

Jul 28 13:59:57 APS-Hustn-FxSvr FaxGetty[15461]: <-- [5:ATH0\r]

Jul 28 13:59:57 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 13:59:57 APS-Hustn-FxSvr FaxGetty[15461]: MODEM set DTR OFF

Jul 28 13:59:58 APS-Hustn-FxSvr FaxGetty[15461]: MODEM set DTR OFF

Jul 28 13:59:58 APS-Hustn-FxSvr FaxGetty[15461]: DELAY 75 ms

Jul 28 13:59:58 APS-Hustn-FxSvr FaxGetty[15461]: MODEM set DTR ON

Jul 28 13:59:58 APS-Hustn-FxSvr FaxGetty[15461]: DELAY 2600 ms

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: DELAY 10 ms

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: MODEM flush i/o

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: <-- [4:ATZ\r]

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:02 APS-Hustn-FxSvr FaxGetty[15461]: DELAY 3000 ms

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: MODEM flush i/o

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: <-- [9:AT#CID=1\r]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: --> [8:AT#CID=1]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: <-- [7:ATS0=0\r]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: --> [6:ATS0=0]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:05 APS-Hustn-FxSvr FaxGetty[15461]: <-- [5:ATE0\r]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [4:ATE0]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: <-- [5:ATV1\r]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: <-- [7:ATQ0X4\r]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: <-- [7:ATS8=2\r]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: <-- [8:ATS7=60\r]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: --> [4:RING]

Jul 28 14:00:06 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Ring

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: <-- [12:AT&H2&I2&R1\r]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: <-- [11:ATS13=1&D2\r]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: <-- [6:AT&C1\r]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:07 APS-Hustn-FxSvr FaxGetty[15461]: <-- [12:AT+FCLASS=?\r]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [7:0,1,2.0]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports "Data"

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports "Class 1"

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports "Class 2.0"

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: <-- [12:AT+FCLASS=1\r]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: MODEM: Mfr USR

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: <-- [5:ATI3\r]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [33:U.S. Robotics 56K FAX EXT V5.4.62]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: <-- [5:ATI7\r]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [24:Configuration Profile...]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [41:Product type           US/Canada External]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [31:Product ID:            00568605]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [50:Options                V32bis,V.80,V.34+,V.90,V.92]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [40:Fax Options            Class 1/Class 2.0]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [50:Line Options           Caller ID, Distinctive Ring]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [30:Clock Freq             92.0Mhz]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [27:EPROM                  256k]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [26:RAM                    32k]

Jul 28 14:00:08 APS-Hustn-FxSvr FaxGetty[15461]: --> [32:FLASH date             3/17/2004]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [29:FLASH rev              5.4.62]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [32:DSP date               3/17/2004]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [29:DSP rev                5.4.62]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM: Model U.S. Robotics 56K FAX EXT V5.4.62

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM: Revision Configuration Profile... Product type           US/Canada External Product ID:            00568605 Options                V32bis,V.80,V.34+,V.90,V.92 Fax Options            Class 1/Class 2.0 Line Options           Caller ID, Distinctive Ring Clock Freq             92.0Mhz EPROM                  256k RAM                    32k FLASH date             3/17/2004 FLASH rev              5.4.62 DSP date               3/17/2004 DSP rev                5.4.62

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: <-- [9:AT+FTM=?\r]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: --> [2:OK]

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 3.85 line/mm

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 7.7 line/mm

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 15.4 line/mm

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports R16 x 15.4 line/mm

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 200 x 100 dpi

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 200 x 200 dpi

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 200 x 400 dpi

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 300 x 300 dpi

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 2400 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 4800 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 7200 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 9600 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 12000 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 14400 bit/s

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports A4 page width (215 mm)

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports B4 page width (255 mm)

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports A3 page width (303 mm)

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports A4 page length (297 mm)

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports B4 page length (364 mm)

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports unlimited page length

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 1-D MH

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 2-D MR

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 2-D MMR

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports no ECM

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports T.30 Annex A, 64-byte ECM

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports T.30 Annex A, 256-byte ECM

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 0 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 5 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 10 ms, 5 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 10 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 20 ms, 10 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 20 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 40 ms, 20 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: MODEM Supports 40 ms/scanline

Jul 28 14:00:09 APS-Hustn-FxSvr FaxGetty[15461]: <-- [9:AT+FRM=?\r]

Jul 28 14:00:39 APS-Hustn-FxSvr FaxGetty[15461]: MODEM TIMEOUT: reading line from modem

Jul 28 14:00:39 APS-Hustn-FxSvr FaxGetty[15461]: Error parsing "+FRM" query response: "OK"

Jul 28 14:00:39 APS-Hustn-FxSvr FaxGetty[15461]: MODEM set DTR OFF

Jul 28 14:00:39 APS-Hustn-FxSvr FaxGetty[15461]: /dev/ttyS7: Can not initialize modem.

Jul 28 14:00:39 APS-Hustn-FxSvr FaxGetty[15461]: STATE CHANGE: RECEIVING -> MODEMWAIT (timeout 30)

 

 

Thanks

Brent

 

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Wednesday, July 28, 2004 12:30 PM
To: Roper, Brent
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Error parsing "+FTM"

 

On 2004.07.28 09:52 "Roper, Brent" wrote:

> I have download 4.2.0rc2 from CVS and have compiled on a Suse 9.0 box.

>  The

> modems are USR sporsters and running in Class1.

>

>

>

> I am getting Error parsing "+FTM" query response: "OK" and then

> /dev/ttyS7

> can not initialize modem.  Then the modem will not answer without

> killing

> the faxgetty process after that

 

The modem is not supposed to respond with just "OK" after the AT+FTM=?

command.  Are you saying that sometimes it does and sometimes it

doesn't?  If so, are you able to discern under what circumstances it

does and under what circumstances it doesn't?  You should set

ServerTracing to 0xFFF in the modem config file and share any relevant

portions of the log (/var/log/messages) file.

 

> I found bug 378 online but that seems to be old one and I can not

> determine

> if the patch is already corrected in 4.2.0rc2.

 

The current patches on bug 370 are already incorporated into 4.2.0rc2.

 

Lee.

Project hosted by iFAX Solutions