HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Black Faxes



I just downloaded 4.2.0rc2 from CVS and configured and installed and I have libtiff 3.5.7 and tiff 3.6.1 all running on Suse 9.0.  The modems are USR sporsters configured in Class 1.  I am receiving black page very frequently. I have searched through the archives and came across bug 195 and the fix is in my tif_fax3.h file.  Below is the log file for one of the black faxes. 

 

Anyone have any Ideas?

 

 

 

Thanks

Brent

 

Jul 26 07:40:05.48: [ 7592]: SESSION BEGIN 000000103

Jul 26 07:40:05.48: [ 7592]: HylaFAX (tm) Version 4.2.0rc2

Jul 26 07:40:05.48: [ 7592]: <-- [13:AT+FCLASS=1A\r]

Jul 26 07:40:11.02: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:11.02: [ 7592]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'

Jul 26 07:40:11.02: [ 7592]: RECV FAX: begin

Jul 26 07:40:11.02: [ 7592]: <-- data [35]

Jul 26 07:40:11.02: [ 7592]: <-- data [2]

Jul 26 07:40:11.17: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:11.17: [ 7592]: <-- data [23]

Jul 26 07:40:11.17: [ 7592]: <-- data [2]

Jul 26 07:40:11.89: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:11.89: [ 7592]: <-- data [10]

Jul 26 07:40:11.89: [ 7592]: <-- data [2]

Jul 26 07:40:14.07: [ 7592]: --> [2:OK]

Jul 26 07:40:14.07: [ 7592]: <-- [9:AT+FRH=3\r]

Jul 26 07:40:14.69: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:15.98: [ 7592]: --> [2:OK]

Jul 26 07:40:15.98: [ 7592]: REMOTE TSI "OMNICARE CLINICAL SW"

Jul 26 07:40:15.98: [ 7592]: <-- [9:AT+FRH=3\r]

Jul 26 07:40:15.99: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:16.27: [ 7592]: --> [2:OK]

Jul 26 07:40:16.27: [ 7592]: REMOTE wants 14400 bit/s

Jul 26 07:40:16.27: [ 7592]: REMOTE wants A4 page width (215 mm)

Jul 26 07:40:16.27: [ 7592]: REMOTE wants unlimited page length

Jul 26 07:40:16.27: [ 7592]: REMOTE wants 7.7 line/mm

Jul 26 07:40:16.27: [ 7592]: REMOTE wants 1-D MH

Jul 26 07:40:16.27: [ 7592]: RECV training at v.17 14400 bit/s

Jul 26 07:40:16.27: [ 7592]: <-- [11:AT+FRM=145\r]

Jul 26 07:40:17.97: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:19.53: [ 7592]: RECV: TCF 2812 bytes, 3% non-zero, 2696 zero-run

Jul 26 07:40:19.54: [ 7592]: --> [10:NO CARRIER]

Jul 26 07:40:19.54: [ 7592]: DELAY 75 ms

Jul 26 07:40:19.61: [ 7592]: TRAINING succeeded

Jul 26 07:40:19.61: [ 7592]: <-- [9:AT+FTH=3\r]

Jul 26 07:40:19.81: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:19.81: [ 7592]: <-- data [3]

Jul 26 07:40:19.81: [ 7592]: <-- data [2]

Jul 26 07:40:20.98: [ 7592]: --> [2:OK]

Jul 26 07:40:20.98: [ 7592]: <-- [11:AT+FRM=146\r]

Jul 26 07:40:21.57: [ 7592]: --> [7:CONNECT]

Jul 26 07:40:21.57: [ 7592]: RECV: begin page

Jul 26 07:41:00.78: [ 7592]: RECV: 2178 total lines, 0 bad lines, 0 consecutive bad lines

Jul 26 07:41:00.78: [ 7592]: RECV: end page

Jul 26 07:41:00.89: [ 7592]: --> [10:NO CARRIER]

Jul 26 07:41:00.89: [ 7592]: <-- [9:AT+FRH=3\r]

Jul 26 07:41:01.19: [ 7592]: --> [7:CONNECT]

Jul 26 07:41:02.09: [ 7592]: --> [2:OK]

Jul 26 07:41:02.09: [ 7592]: RECV recv EOP (no more pages or documents)

Jul 26 07:41:02.09: [ 7592]: DELAY 70 ms

Jul 26 07:41:02.16: [ 7592]: <-- [9:AT+FTH=3\r]

Jul 26 07:41:02.46: [ 7592]: --> [7:CONNECT]

Jul 26 07:41:02.46: [ 7592]: <-- data [3]

Jul 26 07:41:02.46: [ 7592]: <-- data [2]

Jul 26 07:41:03.63: [ 7592]: --> [2:OK]

Jul 26 07:41:03.63: [ 7592]: RECV send MCF (message confirmation)

Jul 26 07:41:03.64: [ 7592]: RECV FAX (000000103): from OMNICARE CLINICAL SW, page 1 in 0:44, INF, 7.7 line/mm, 1-D MH, 14400 bit/s

Jul 26 07:41:03.64: [ 7592]: RECV FAX (000000103): recvq/fax000000103.tif from OMNICARE CLINICAL SW, route to <unspecified>, 1 pages in 0:52

Jul 26 07:41:03.64: [ 7592]: <-- [9:AT+FRH=3\r]

Jul 26 07:41:04.04: [ 7592]: --> [7:CONNECT]

Jul 26 07:41:05.00: [ 7592]: --> [2:OK]

Jul 26 07:41:05.00: [ 7592]: RECV FAX: bin/faxrcvd "recvq/fax000000103.tif" "ttyS1" "000000103" "" "" " AMER PHARM SVCS"

Jul 26 07:41:05.01: [ 7592]: RECV FAX: end

Jul 26 07:41:05.01: [ 7592]: SESSION END

 

 




Project hosted by iFAX Solutions