HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Strange page-chop observed by receivers.



On 2004.07.22 03:24 An Intrepid HylaFax User wrote:
I have a problem destination in Hong Kong which claims all of the
faxes
issued by my servers to them are "chopped".

I'm using Hylafax 4.1.7 with a Multitech ZBA with 1.28H firmware
(freshly
upgraded), run in Class 2.1 mode.

If you wanted to rule-out the modem then you could upgrade to 4.2.0 and switch to Class 1/1.0 and then see if the problem persists.


However, in all likelihood, it is the receiver causing the problem. You may be able to alleviate the problem by sending in 1D-MH rather than 2D-MMR.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions