![]() |
Hello! I've installed capi4hylafax-01.02.02 and hylafax from CVS. I've connected BRI (2B channels) and everything works OK except I cann't make two connection at the same one time. What else should I setup in configs of hylafax to make concurent calls ? ---config.faxCAPI---- SpoolDir: /var/spool/hylafax FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd PollRcvdCmd: /var/spool/fax/bin/pollrcvd FaxReceiveUser: uucp LogFile: /tmp/capifax.log ServerTracing: 43839 SendFaxCmd: /usr/bin/c2faxsend { HylafaxDeviceName: faxCAPI11 RecvFileMode: 0600 FAXNumber: +48.xx.xxxxx LocalIdentifier: "line01" MaxConcurrentRecvs: 1 # nie podnos telefonu #RingsBeforeAnswer: 0 OutgoingController: 1 OutgoingMSN: xxxx SuppressMSN: 1 NumberPrefix: UseISDNFaxService: 0 RingingDuration: 0 { Controller: 1 AcceptSpeech: 1 UseDDI: 0 DDIOffset: "12345" DDILength: 3 IncomingDDIs: IncomingMSNs: xx AcceptGlobalCall: 1 } } { HylafaxDeviceName: faxCAPI12 RecvFileMode: 0600 FAXNumber: +48.xx.xxxxx LocalIdentifier: "line02" MaxConcurrentRecvs: 1 # nie podnos telefonu #RingsBeforeAnswer: 0 OutgoingController: 1 OutgoingMSN: xx # CLIR - Calling Line Identification Restriction SuppressMSN: 1 NumberPrefix: UseISDNFaxService: 0 RingingDuration: 0 { Controller: 1 AcceptSpeech: 1 UseDDI: 0 DDIOffset: "12345" DDILength: 3 IncomingDDIs: IncomingMSNs: xxx AcceptGlobalCall: 1 } } ---------------------------- -- Greetings maurycy ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*