Re: [hylafax-users] Problem with inbound routing, still

["Ulf Zimmermann" <ulf@xxxxxxxxxxxxxxxxxxx>]

> -----Original Message-----
> From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
> Sent: Tuesday, July 13, 2004 14:57
> To: Ulf Zimmermann
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Problem with inbound routing, still
> 
> On 2004.07.13 14:50 Ulf Zimmermann wrote:
> > For the archives:
> >
> > To get around NDID not being handed to faxrcvd because NMBR is
<NONE>,
> > I
> > added these lines to the faxrcvd script for now:
> >
> > if [ "$CIDNAME" = "" ]; then
> >     CIDNAME=`sed -n '/NDID=/s/.*=\(.*\)\]/\1/p' log/c$COMMID`
> > fi
> 
> Why is the NDID signal appearing in your session log?
> 
> (The session log only starts *after* the call is answered, and the
> CID/DID info should have come *before* that.)
> 
> Lee.

Here is the top of the logfile:

Jul 12 16:40:00.80: [ 1659]: SESSION BEGIN 00016515 15105800929
Jul 12 16:40:00.80: [ 1659]: HylaFAX (tm) Version 4.1.8
Jul 12 16:40:00.80: [ 1659]: <-- [23:AT+VRID=10+FCC=,,,,1;A\r]
Jul 12 16:40:01.08: [ 1659]: --> [15:NDID=5105800931]
Jul 12 16:40:01.08: [ 1659]: --> [15:NMBR=6505561217]
Jul 12 16:40:06.79: [ 1659]: --> [74:+FHT: FF 03 40 2E 63 6E 49 20 72 65
74 6E >
Jul 12 16:40:07.08: [ 1659]: --> [26:+FHT: FF 13 80 00 EE FA 00]
Jul 12 16:40:07.56: [ 1659]: --> [4:+FCO]

In the modem config I got this:

QualifyCID:             etc/cid         # you must create this file
ModemResetCmds:         "AT#CID=10"
CIDNumber:              "NMBR="
CIDName:                "NDID="
CIDNumberAnswerLength:  10
#ModemAnswerCmd:                ATA
ModemAnswerCmd:         AT+VRID=10+FCC=,,,,1;A

Regards, Ulf.

---------------------------------------------------------------------
Autotradecenter.com Inc, IT Manager, T: 650-532-6382, F: 650-532-6441
4600 Bohannon Drive, Suite 100, Menlo Park, CA 94025
---------------------------------------------------------------------


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*