Re: [hylafax-users] 4.2.0rc problem with some Class 1 modems (Zoom 56ks in particular)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.06.28 18:09 Karl Denninger wrote:
> I'm getting hangs on 4.2.0rc that I was NOT getting on 4.1.x.
>
> Specifically, it hangs here:

> Jun 28 19:54:20.65: [42478]: <-- [11:AT+FTM=146\r]
> Jun 28 19:54:50.66: [42478]: MODEM <Timeout>
> Jun 28 19:54:50.66: [42478]: SEND end page
> Jun 28 19:54:50.66: [42478]: Unspecified Transmit Phase C error
> Jun 28 19:54:50.66: [42478]: <-- [9:AT+FTH=3\r]
> Jun 28 19:54:53.22: [42478]: --> [0:]
> Jun 28 19:54:53.22: [42478]: SEND FAILED: JOB 1166 DEST 202-225-3719
> ERR
> Unspeci
> fied Transmit Phase C error; too many attempts to send
> Jun 28 19:54:53.22: [42478]: <-- [5:ATH0\r]
> Jun 28 19:54:58.23: [42478]: MODEM <Timeout>
> Jun 28 19:54:58.23: [42478]: SESSION END
>
>
> And that's it.  The modem is off-hook and needs to be power-cycled.

If you didn't experience such problems with 4.1.x, then I suspect that 
you'll have to use:

Class1ECMSupport: no

in your modem config file unless you can get Zoom to fix the problem.  
The fact that the modem needs to be power-cycled indicates hardware 
lock-up, which shouldn't ever be possible from the software.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*