[hylafax-users] RICOH fax problems

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] RICOH fax problems
From: Sipho.Mothobi@xxxxxxxxx
Date: Tue, 15 Jun 2004 19:41:03 +0200

Hi
I am having problems with receiving fax as it goes offline as soon as it has received the fax i sent through to it.
I have attached the log for viewing hopefully someone has come accross this.
-------------------------------- FAX JOB LOG ------------------------------------------------------------------
Jun 14 18:10:23.34: [17605]: SESSION BEGIN 000000242 270110#######
Jun 14 18:10:23.34: [17605]: HylaFAX (tm) Version 4.1.8
Jun 14 18:10:23.34: [17605]: SEND FAX: JOB 940 DEST 0,####### COMMID 000000242 DEVICE '/dev/ttySL0'
Jun 14 18:10:23.34: [17605]: DELAY 75 ms
Jun 14 18:10:23.42: [17605]: DELAY 2600 ms
Jun 14 18:10:27.03: [17605]: DELAY 10 ms
Jun 14 18:10:27.04: [17605]: <-- [4:ATZ\r]
Jun 14 18:10:27.04: [17605]: --> [2:OK]
Jun 14 18:10:27.04: [17605]: DELAY 3000 ms
Jun 14 18:10:30.04: [17605]: <-- [5:ATE0\r]
Jun 14 18:10:30.04: [17605]: --> [4:ATE0]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [5:ATV1\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [5:ATQ0\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [7:ATS0=0\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [7:ATS8=2\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [8:ATS7=60\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [6:AT&K3\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [6:AT&D2\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [6:AT&C1\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [12:AT+FCLASS=1\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [5:ATM0\r]
Jun 14 18:10:30.04: [17605]: --> [2:OK]
Jun 14 18:10:30.04: [17605]: <-- [12:AT+FCLASS=1\r]
Jun 14 18:10:30.14: [17605]: --> [2:OK]
Jun 14 18:10:30.14: [17605]: DIAL 0,#######
Jun 14 18:10:30.14: [17605]: <-- [14:ATDT0,#######\r]
Jun 14 18:10:41.96: [17605]: --> [7:CONNECT]
Jun 14 18:10:43.39: [17605]: --> [2:OK]
Jun 14 18:10:43.39: [17605]: REMOTE NSF "00 00 25 00 00 00 12 10 6D 02 00 58 00 28 B8 A4 E0 80 01 A6"
Jun 14 18:10:43.39: [17605]: NSF remote fax equipment: Ricoh
Jun 14 18:10:43.39: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:10:43.41: [17605]: --> [7:CONNECT]
Jun 14 18:10:44.19: [17605]: --> [2:OK]
Jun 14 18:10:44.19: [17605]: REMOTE NSF "00 00 25 01 48 43 45 54 20 4E 4F 49 54 41 4D 52 4F 46 4E 49 20 42 4D 52 2F"
Jun 14 18:10:44.19: [17605]: NSF remote fax equipment: Ricoh
Jun 14 18:10:44.19: [17605]: NSF remote station ID: "/RMB INFORMATION TECH"
Jun 14 18:10:44.19: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:10:44.21: [17605]: --> [7:CONNECT]
Jun 14 18:10:44.89: [17605]: --> [2:OK]
Jun 14 18:10:44.89: [17605]: REMOTE CSI "011#######"
Jun 14 18:10:44.89: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:10:44.91: [17605]: --> [7:CONNECT]
Jun 14 18:10:45.23: [17605]: --> [2:OK]
Jun 14 18:10:45.23: [17605]: REMOTE best rate 33600 bit/s
Jun 14 18:10:45.23: [17605]: REMOTE max page width 1728 pixels in 215 mm
Jun 14 18:10:45.23: [17605]: REMOTE max unlimited page length
Jun 14 18:10:45.23: [17605]: REMOTE best vres 7.7 line/mm
Jun 14 18:10:45.23: [17605]: REMOTE best format 2-D MMR
Jun 14 18:10:45.23: [17605]: REMOTE supports T.30 Annex A, ECM
Jun 14 18:10:45.23: [17605]: REMOTE best 10 ms/scanline
Jun 14 18:10:45.23: [17605]: USE 14400 bit/s
Jun 14 18:10:45.23: [17605]: USE 10 ms/scanline
Jun 14 18:10:45.23: [17605]: SEND file "docq/doc1410.ps;41"
Jun 14 18:10:45.23: [17605]: USE page width 1728 pixels in 215 mm
Jun 14 18:10:45.23: [17605]: USE unlimited page length
Jun 14 18:10:45.23: [17605]: USE 7.7 line/mm
Jun 14 18:10:45.23: [17605]: USE 2-D MR
Jun 14 18:10:45.23: [17605]: SEND training at v.17 14400 bit/s
Jun 14 18:10:45.23: [17605]: <-- [9:AT+FTH=3\r]
Jun 14 18:10:45.31: [17605]: --> [7:CONNECT]
Jun 14 18:10:45.31: [17605]: <-- data [23]
Jun 14 18:10:45.31: [17605]: <-- data [2]
Jun 14 18:10:47.15: [17605]: --> [7:CONNECT]
Jun 14 18:10:47.15: [17605]: <-- data [6]
Jun 14 18:10:47.15: [17605]: <-- data [2]
Jun 14 18:10:47.53: [17605]: --> [2:OK]
Jun 14 18:10:47.53: [17605]: <-- [9:AT+FTS=7\r]
Jun 14 18:10:47.59: [17605]: --> [2:OK]
Jun 14 18:10:47.59: [17605]: <-- [11:AT+FTM=145\r]
Jun 14 18:10:47.69: [17605]: --> [7:CONNECT]
Jun 14 18:10:47.69: [17605]: <-- data [1024]
Jun 14 18:10:47.69: [17605]: <-- data [1024]
Jun 14 18:10:47.69: [17605]: <-- data [652]
Jun 14 18:10:47.69: [17605]: <-- data [2]
Jun 14 18:10:50.85: [17605]: --> [2:OK]
Jun 14 18:10:50.85: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:10:51.59: [17605]: --> [7:CONNECT]
Jun 14 18:10:52.61: [17605]: --> [2:OK]
Jun 14 18:10:52.61: [17605]: TRAINING succeeded
Jun 14 18:10:52.61: [17605]: DELAY 75 ms
Jun 14 18:10:52.68: [17605]: <-- [11:AT+FTM=146\r]
Jun 14 18:10:52.77: [17605]: --> [7:CONNECT]
Jun 14 18:10:52.77: [17605]: SEND begin page
Jun 14 18:10:52.77: [17605]: <-- data [1027]
Jun 14 18:10:52.77: [17605]: <-- data [1026]
Jun 14 18:10:52.77: [17605]: <-- data [1024]
Jun 14 18:10:52.77: [17605]: <-- data [1024]
.
.
.
.
.
.
.
Jun 14 18:10:52.77: [17605]: <-- data [1024]
Jun 14 18:10:52.77: [17605]: <-- data [1024]
.
.
.
.
Jun 14 18:11:09.67: [17605]: <-- data [1024]
Jun 14 18:11:11.89: [17605]: <-- data [1025]
Jun 14 18:11:11.89: [17605]: <-- data [291]
Jun 14 18:11:11.89: [17605]: SENT 41251 bytes of data
Jun 14 18:11:11.89: [17605]: <-- data [1024]
Jun 14 18:11:11.89: [17605]: <-- data [1025]
Jun 14 18:11:11.89: [17605]: <-- data [1024]
Jun 14 18:11:14.11: [17605]: <-- data [1024]
Jun 14 18:11:14.11: [17605]: <-- data [1024]
Jun 14 18:11:14.11: [17605]: <-- data [1024]
Jun 14 18:11:14.11: [17605]: <-- data [81]
Jun 14 18:11:14.11: [17605]: SENT 6225 bytes of data
Jun 14 18:11:14.11: [17605]: SEND 2D RTC
Jun 14 18:11:14.11: [17605]: <-- data [30]
Jun 14 18:11:14.11: [17605]: <-- data [2]
Jun 14 18:11:14.11: [17605]: SEND end page
Jun 14 18:11:19.57: [17605]: --> [2:OK]
Jun 14 18:11:19.57: [17605]: <-- [9:AT+FTS=7\r]
Jun 14 18:11:19.63: [17605]: --> [2:OK]
Jun 14 18:11:19.63: [17605]: SEND send MPS (more pages, same document)
Jun 14 18:11:19.63: [17605]: <-- [9:AT+FTH=3\r]
Jun 14 18:11:19.71: [17605]: --> [7:CONNECT]
Jun 14 18:11:19.71: [17605]: <-- data [3]
Jun 14 18:11:19.71: [17605]: <-- data [2]
Jun 14 18:11:21.03: [17605]: --> [2:OK]
Jun 14 18:11:21.03: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:11:21.43: [17605]: --> [7:CONNECT]
Jun 14 18:11:22.47: [17605]: --> [2:OK]
Jun 14 18:11:22.47: [17605]: SEND recv MCF (message confirmation)
Jun 14 18:11:22.47: [17605]: SEND FAX (000000242): FROM hylafax- admin@xxxxxxxxx TO 0,####### (page 1 of 2 sent in 0:37)
Jun 14 18:11:22.47: [17605]: USE page width 1728 pixels in 215 mm
Jun 14 18:11:22.47: [17605]: USE unlimited page length
Jun 14 18:11:22.47: [17605]: USE 7.7 line/mm
Jun 14 18:11:22.47: [17605]: USE 2-D MR
Jun 14 18:11:22.47: [17605]: DELAY 75 ms
Jun 14 18:11:22.55: [17605]: <-- [11:AT+FTM=146\r]
Jun 14 18:11:22.63: [17605]: --> [7:CONNECT]
Jun 14 18:11:22.63: [17605]: SEND begin page
Jun 14 18:11:22.63: [17605]: <-- data [1027]
Jun 14 18:11:22.63: [17605]: <-- data [1026]
Jun 14 18:11:22.63: [17605]: <-- data [1024]
Jun 14 18:11:22.63: [17605]: <-- data [1024]
Jun 14 18:11:22.63: [17605]: <-- data [1024]
Jun 14 18:11:22.63: [17605]: <-- data [1024]
Jun 14 18:11:22.63: [17605]: <-- data [1025]
Jun 14 18:11:22.63: [17605]: <-- data [1028]
Jun 14 18:11:24.13: [17605]: <-- data [1024]
Jun 14 18:11:24.13: [17605]: <-- data [1029]
Jun 14 18:11:24.13: [17605]: <-- data [180]
Jun 14 18:11:24.13: [17605]: SENT 10417 bytes of data
Jun 14 18:11:24.13: [17605]: SEND 2D RTC
Jun 14 18:11:24.13: [17605]: <-- data [30]
Jun 14 18:11:24.13: [17605]: <-- data [2]
Jun 14 18:11:24.13: [17605]: SEND end page
Jun 14 18:11:28.85: [17605]: --> [2:OK]
Jun 14 18:11:28.85: [17605]: <-- [9:AT+FTS=9\r]
Jun 14 18:11:28.93: [17605]: --> [2:OK]
Jun 14 18:11:28.93: [17605]: SEND send EOP (no more pages or documents)
Jun 14 18:11:28.93: [17605]: <-- [9:AT+FTH=3\r]
Jun 14 18:11:29.01: [17605]: --> [7:CONNECT]
Jun 14 18:11:29.01: [17605]: <-- data [3]
Jun 14 18:11:29.01: [17605]: <-- data [2]
Jun 14 18:11:30.31: [17605]: --> [2:OK]
Jun 14 18:11:30.31: [17605]: <-- [9:AT+FRH=3\r]
Jun 14 18:11:30.71: [17605]: --> [7:CONNECT]
Jun 14 18:11:31.79: [17605]: --> [2:OK]
Jun 14 18:11:31.79: [17605]: SEND recv MCF (message confirmation)
Jun 14 18:11:31.79: [17605]: SEND FAX (000000242): FROM hylafax- admin@xxxxxxxxx TO 0,####### (page 2 of 2 sent in 0:09)
Jun 14 18:11:31.79: [17605]: SEND FAX (000000242): FROM hylafax- admin@xxxxxxxxx TO 0,####### (docq/doc1410.ps;41 sent in 0:46)
Jun 14 18:11:31.79: [17605]: <-- [9:AT+FTH=3\r]
Jun 14 18:11:31.87: [17605]: --> [7:CONNECT]
Jun 14 18:11:31.87: [17605]: <-- data [3]
Jun 14 18:11:31.87: [17605]: <-- data [2]
Jun 14 18:11:33.17: [17605]: --> [2:OK]
Jun 14 18:11:33.17: [17605]: <-- [5:ATH0\r]
Jun 14 18:11:33.29: [17605]: --> [2:OK]
Jun 14 18:11:33.29: [17605]: SESSION END

CountryCode: 27
AreaCode: 011
FAXNumber: +27.11.282.8179
LongDistancePrefix: 0
InternationalPrefix: 09
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "Rand Merchant Bank iFax"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing

Follow-Ups:
- Re: [hylafax-users] RICOH fax problems
  - From: Giulio Orsero

Prev by Date: Re: [hylafax-users] Sharing a dialout modem with faxgetty
Next by Date: Re: [hylafax-users] RICOH fax problems
Previous by thread: Re: [hylafax-users] Sharing a dialout modem with faxgetty
Next by thread: Re: [hylafax-users] RICOH fax problems
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions