HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] how can i change the timeout for sending a fax?



Hi,

Another question? How cam i change the timeout when sending a fax.

My config looks like this:

# $Id: topic,v 1.3 2002/05/24 16:24:52 darren Exp $
#
# prototype config for Topic modems and other similarly broken firmwares
#

#
CountryCode:            49
AreaCode:               211
FAXNumber:              +49.211.xxxxxx
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          527
SessionTracing:         527
RecvFileMode:           0644
LogFileMode:            0600
DeviceMode:             0666
RingsBeforeAnswer:      0
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "test"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#

ModemType:              Class1          # use this to supply a hint
ModemResetCmds:         ATZ ATX3
ModemDialCmd:          ATDT,%s          

# as of v1.20, +FTS is not supported, which will cause "Stop and wait"
# failures unless we use software pauses instead...

Class1PPMWaitCmd:       "<delay\0727>"  # \072 == :  to avoid awk problem
Class1TCFWaitCmd:       "<delay\0727>"
Class1EOPWaitCmd:       "<delay\0729>"
Class1SwitchingCmd:     "<delay\0727>"  # assumption: +FRS not supported


Thanks!


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions