![]() |
BUSY is not the same as NOCARRIER man hylafax-config, and spend some time reading about MaxDials, MaxTries, and NoCarrierRetrys As long as your modem can reliably distinguish BUSY and NOCARRIER, you should be fine. -Darren -- Darren Nickerson Senior Sales & Support Engineer iFax Solutions, Inc. www.ifax.com darren.nickerson@xxxxxxxx +1.215.438.4638 +1.215.243.8335 (fax) ----- Original Message ----- From: "Peter Verhoeven" <Peter@xxxxxxxxxxxxxxxx> To: "'Lee Howard'" <faxguy@xxxxxxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Sunday, May 16, 2004 6:46 PM Subject: Re: [hylafax-users] automatic fax detection (outbound) > What about avoiding retries from hylafax? I can set it the retries to 0 I > guess, but then busy numbers will never be tried? > > Thanks, > Pete. > > -----Original Message----- > From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] > Sent: Friday, 14 May 2004 10:36 PM > To: Peter Verhoeven > Cc: hylafax-users@xxxxxxxxxxx > Subject: Re: [hylafax-users] automatic fax detection (outbound) > > > On 2004.05.13 20:29 Peter Verhoeven wrote: > > Presuming it's impossible (hylafax or otherwise) to detect a fax > > machine on > > a line prior to the flagfall, what's the best way in hylafax to > > minimise > > call length and not attempt further dials, if a given number is not a > > fax > > number? > > You minimize the amount of time after ATDT before the modem responds > with NO CARRIER. > > Usually there is an S-register in your modem that controls this. Look > at your modem manual. > > Lee. > Disclaimer > **************************************************************************** > ** > This message contains privileged and confidential information intended only > for the use of the addressee named above. If you are not the intended > recipient of this message, you are hereby notified that you must not > disseminate, copy, or take any action in reliance on it. If you have > received this message in error, please notify Morris International > immediately and delete all copies. Any views expressed in this message are > those of the individual sender, except where the sender specifically states > them to be the views of Morris International. > **************************************************************************** > ** > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null > *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* > > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*