[hylafax-users] T.30 prologue frames error

[Josef Teufer <josef.teufer@xxxxxxxxxxxx>]

Hello,

I try to use Hylafax 4.1.8 with T.38modem (0.6.2) from the openH323
project. But i keep getting errors like this:

May 06 13:29:55.72: [ 4200]: MODEM input buffering disabled
May 06 13:29:57.22: [ 4200]: --> HDLC<21:FF C0 04 DB 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00>
May 06 13:29:57.22: [ 4200]: --> [2:OK]
May 06 13:29:57.22: [ 4200]: REMOTE NSF "DB 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 4A"
May 06 13:29:57.22: [ 4200]: NSF remote fax equipment: unknown
May 06 13:29:57.22: [ 4200]: <-- [9:AT+FRH=3\r]
May 06 13:29:57.22: [ 4200]: --> [7:CONNECT]
May 06 13:29:57.95: [ 4200]: --> HDLC<23:FF C0 02 AC 8C CC 8C 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04>
May 06 13:29:57.95: [ 4200]: --> [2:OK]
May 06 13:29:57.95: [ 4200]: REMOTE CSI "1315"
May 06 13:29:57.95: [ 4200]: <-- [9:AT+FRH=3\r]
May 06 13:29:57.95: [ 4200]: --> [7:CONNECT]
May 06 13:29:58.30: [ 4200]: --> HDLC<9:FF C8 01 00 73 15 23 01 08>
May 06 13:29:58.30: [ 4200]: --> [2:OK]
May 06 13:29:58.30: [ 4200]: REMOTE best rate 9600 bit/s
May 06 13:29:58.30: [ 4200]: REMOTE max page width 1728 pixels in 215 mm
May 06 13:29:58.30: [ 4200]: REMOTE max unlimited page length
May 06 13:29:58.30: [ 4200]: REMOTE best vres 7.7 line/mm
May 06 13:29:58.30: [ 4200]: REMOTE best format 2-D MMR
May 06 13:29:58.30: [ 4200]: REMOTE supports T.30 Annex A, ECM
May 06 13:29:58.30: [ 4200]: REMOTE best 10 ms/scanline
May 06 13:29:58.30: [ 4200]: USE 9600 bit/s
May 06 13:29:58.30: [ 4200]: USE 10 ms/scanline
May 06 13:29:58.30: [ 4200]: SEND file "docq/doc82.ps;40"
May 06 13:29:58.30: [ 4200]: USE page width 1728 pixels in 215 mm
May 06 13:29:58.30: [ 4200]: USE unlimited page length
May 06 13:29:58.30: [ 4200]: USE 3.85 line/mm
May 06 13:29:58.30: [ 4200]: USE 2-D MR
May 06 13:29:58.30: [ 4200]: SEND training at v.29 9600 bit/s
May 06 13:29:58.30: [ 4200]: <-- [9:AT+FTH=3\r]
May 06 13:29:58.30: [ 4200]: --> [7:CONNECT]
May 06 13:29:58.30: [ 4200]: <-- HDLC<23:FF C0 C2 1E 86 66 1C CC 2E 04
04 04 04 04 04 04 04 04 04 04 04 04 04>
May 06 13:29:58.30: [ 4200]: <-- data [23]
May 06 13:29:58.30: [ 4200]: <-- data [2]
May 06 13:30:00.85: [ 4200]: --> [0:]
May 06 13:30:00.85: [ 4200]: MODEM <Empty line>
May 06 13:30:00.85: [ 4200]: MODEM TIMEOUT: sending TSI frame
May 06 13:30:00.85: [ 4200]: Error sending T.30 prologue frames


as i understand it, the Modem is expected to say something but remains
silent? (The Modem is invoked with:

t38modem -g <GK-IPadress> -u <PBXuser> --old-asn -o <logfile> -tttttt -p
ttyx1,ttyx2

)

My GK and PBX is a Innovaphone Ip400 and complains about T.38UDP
encoding warnings. Has anyone experience with similar problems? I don't
really know where to start debugging this error. Thanks for any Help in
advance!

BR Josef


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*