HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hylafax greater than 4.1.5 and Diva card



Well,

I made test on RH 7.3 with Hylafax 4.1.8, 4.1.6 and 4.1.5.

Strange, I just made the ./configure, make, make install and faxsetup
against
these 3 version of Hylafex and only the 4.1.5  run well !!

I don't know why but every thing seems OK but only the 4.1.5 can answer well
to incoming call for FAX.
For other version, I can see the RING call in faxstat but nothing is done.

I there some thing to do for other version of HylaFax for Eicon Divas 2BRI
card ?

So my gateway just run on RH7.3 this HylaFax 4.1.5 but finaly
I can't upgrade nor OS , nor HylaFax! :-(
HylaFax greater than 4.1.5 have some problem to compil on RH 9;
I see in CHANGE log that change have been made since 4.1.6 for new version
of GCC.


Thx
Régis TOUVRON

----- Original Message ----- 
From: "Régis TOUVRON - EuroAdvis -" <rtouvron@xxxxxxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Wednesday, May 05, 2004 1:53 PM
Subject: [hylafax-users] Hylafax and Diva card


> I have set up a new hylafax server ( Redhat9 with Diva driver ) and
hylafax
> 4.1.8.
>
> The gateway was runing very well in RedHat 8 but since i have installed
new
> one in RedHat 9,
> and copied bask the config file for my modem, i can't received any FAX.
> ( I can send fax )
>
> In the log, i have this message :
>
> May 05 12:25:16.47: [  933]: SESSION BEGIN 00000017 330155121032
> May 05 12:25:16.47: [  933]: HylaFAX (tm) Version 4.1.8
> May 05 12:25:16.47: [  933]: <-- [4:ATA\r]
> May 05 12:25:16.56: [  933]: --> [5:ERROR]
> May 05 12:25:16.56: [  933]: ANSWER: Ring detected without successful
> handshake
> May 05 12:25:16.56: [  933]: SESSION END
>
> This the config of my card : config.ttyds01 ( this config was running fine
> on RH8.0 whith hylafax 4.1.5 )
>
> CountryCode:            33
> AreaCode:               01
> FAXNumber:              "+33 157021069"
> LongDistancePrefix:     00
> InternationalPrefix:    00
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> SessionTracing:         0xFFF
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          low
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        SARJEL-SA
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
> #
> #
> ModemType:              Class2
> ModemRate:              19200   # on boards supporting V.34-fax, this may
> need to be 57600
> ModemFlowControl:       rtscts
> ModemResetCmds:         AT#CID=7    # to get CID info
> ModemNoFlowCmd:         AT&K0
> ModemSoftFlowCmd:       AT&K4
> ModemHardFlowCmd:       AT&K3
> Class2APQueryCmd:       none
> Class2SPLCmd:           none
> Class2TBCCmd:           none
>
>
> Cordialement,
>
> Régis T.
> ________________________________________________________________
> Euro'Advis Technologies
> 14, rue du Séminaire
> Bat. G6B
> 94516 RUNGIS CEDEX
>
> Tél : +33 (0) 1 57 02 10 60
> Fax : +33 (0) 1 57 02 10 69
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions