 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Problems with hylafax 4.1.8 and answering
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Problems with hylafax 4.1.8 and answering
- From: hylafax-users-bounce@xxxxxxxxxxx
- Date: Fri, 9 Apr 2004 15:14:38 -0700
Hello, I got the following setup right now: RedHat 8 with a Patton 2977 card (ex-Digi DataFire T1/PRI 23/24 channels) Hylafax 4.1.8 After some fighting with the driver provided (Patton never updated it since buying it from Digi) I got the card to work and I can send out faxes fine. But I got two problems incoming. One is probably not hylafax related but phone company or hardware related (call number on PRI, it rings, never stops, even if you hang up. Try to answer it, get NO DIALTONE and it stops ringing). But the second problem is something in Hylafax. I got the modems configured as Class 2: ModemType: Class2 # use this to supply a hint ModemRate: 38400 ModemFlowControl: rtscts ModemNoFlowCmd: AT&K0 ModemSoftFlowCmd: AT&K4 ModemHardFlowCmd: AT&K3 Class2APQueryCmd: none # not available ModemAnswerCmd: AT+FCC=,,,,1;A When I get a call, it sees the RING but immediately does "Ring detected without successful handshake.": Apr 9 15:07:12 faxfrmt01 FaxGetty[1307]: OPEN /dev/dg/0/00 HylaFAX (tm) Version 4.1.8 Apr 9 15:07:12 faxfrmt01 FaxGetty[1307]: Purge stale UUCP lock /var/lock/LCK..00 Apr 9 15:07:13 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF Apr 9 15:07:13 faxfrmt01 FaxGetty[1307]: DELAY 75 ms Apr 9 15:07:13 faxfrmt01 FaxGetty[1307]: MODEM set DTR ON Apr 9 15:07:13 faxfrmt01 FaxGetty[1307]: DELAY 2600 ms Apr 9 15:07:17 faxfrmt01 FaxGetty[1307]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Apr 9 15:07:17 faxfrmt01 FaxGetty[1307]: DELAY 10 ms Apr 9 15:07:17 faxfrmt01 FaxGetty[1307]: MODEM flush i/o Apr 9 15:07:17 faxfrmt01 FaxGetty[1307]: <-- [4:ATZ\r] Apr 9 15:07:19 faxfrmt01 FaxGetty[1307]: --> [3:ATZ] Apr 9 15:07:19 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:19 faxfrmt01 FaxGetty[1307]: DELAY 3000 ms Apr 9 15:07:22 faxfrmt01 FaxGetty[1307]: <-- [5:ATE0\r] Apr 9 15:07:22 faxfrmt01 FaxGetty[1307]: --> [4:ATE0] Apr 9 15:07:22 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:22 faxfrmt01 FaxGetty[1307]: <-- [5:ATV1\r] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [5:ATQ0\r] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [7:ATS0=0\r] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:23 faxfrmt01 FaxGetty[1307]: <-- [7:ATS8=2\r] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [8:ATS7=60\r] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [6:AT&K3\r] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=?\r] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [15:0,1,2,2.0,2.1,8] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Data" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 1" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2.0" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Class 2.1" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: MODEM Supports "Voice" Apr 9 15:07:24 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=2\r] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FMFR?\r] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [18:Digi International] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Mfr Digi International Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FMDL?\r] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [15:RAS modem 56000] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FREV?\r] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [19:V80006691_K4-K56_DS] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Model RAS modem 56000 Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: MODEM: Revision V80006691_K4-K56_DS Apr 9 15:07:25 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FDCC=?\r] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [45:(0-1),(0-5),(0-4),(0-2),(0-3),(0-2),(0),(0-7)] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 3.85 line/mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 7.7 line/mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2400 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 4800 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 7200 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 9600 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 12000 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 14400 bit/s Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 1728 pixels in 215 mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 2048 pixels in 255 mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 2432 pixels in 303 mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 1216 pixels in 151 mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports page width 864 pixels in 107 mm Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports A4 page length (297 mm) Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports B4 page length (364 mm) Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports unlimited page length Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 1-D MR Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D MR Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D Uncompressed Mode Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 2-D MMR Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports no ECM Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports T.30 Annex A, ECM Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 0 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 5 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 10 ms, 5 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 10 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 20 ms, 10 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 20 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 40 ms, 20 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 40 ms/scanline Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FCQ=?\r] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [3:0-2] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: MODEM Supports 1D+2D copy quality checking (but not enabled) Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FSPL=?\r] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [3:0-1] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [12:AT+FCLASS=2\r] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:26 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FTBC=0\r] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [10:AT+FBOR=0\r] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [13:AT+FPHCTO=30\r] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: MODEM DIGI INTERNATIONAL RAS modem 56000/V80006691_K4-K56_DS Apr 9 15:07:27 faxfrmt01 FaxGetty[1307]: <-- [5:ATM0\r] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: <-- [9:AT+FCR=1\r] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: <-- [31:AT+FLID="Autotradecenter Inc."\r] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: STATE CHANGE: BASE -> RUNNING (timeout 30) Apr 9 15:07:28 faxfrmt01 FaxGetty[1307]: MODEM input buffering disabled Here comes the call: Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: STATE CHANGE: RUNNING -> LISTENING Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM input buffering enabled Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: --> [4:RING] Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: STATE CHANGE: LISTENING -> ANSWERING Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM input buffering enabled Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: ANSWER: Ring detected without successful handshake Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: <-- [5:ATH0\r] Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: servertracing = 32767 (line 19) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: sessiontracing = 11 (line 20) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: recvfilemode = 0600 (line 21) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: logfilemode = 0600 (line 22) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: devicemode = 0600 (line 23) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: ringsbeforeanswer = 1 (line 24) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: speakervolume = off (line 25) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: gettyargs = -h %l dx_%s (line 26) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: localidentifier = Autotradecenter Inc. (line 27) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: logfacility = local1 (line 28) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: taglinefont = etc/lutRS18.pcf (line 29) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: taglineformat = From %%l|%c|Page %%P of %%T (line 30) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: maxrecvpages = 25 (line 31) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemtype = Class2 (line 34) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemrate = 38400 (line 35) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemflowcontrol = rtscts (line 36) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemnoflowcmd = AT&K0 (line 37) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemsoftflowcmd = AT&K4 (line 38) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemhardflowcmd = AT&K3 (line 39) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: class2apquerycmd = none (line 41) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: qualifycid = etc/cid (line 44) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemresetcmds = AT#CID=1 (line 45) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: cidnumber = NMBR= (line 46) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: cidname = NAME= (line 47) Apr 9 15:12:51 faxfrmt01 FaxGetty[1307]: modemanswercmd = AT+FCC=,,,,1;A (line 50) Apr 9 15:12:52 faxfrmt01 FaxGetty[1307]: MODEM set DTR OFF Apr 9 15:12:52 faxfrmt01 FaxGetty[1307]: DELAY 75 ms Apr 9 15:12:53 faxfrmt01 FaxGetty[1307]: MODEM set DTR ON Apr 9 15:12:53 faxfrmt01 FaxGetty[1307]: DELAY 2600 ms Apr 9 15:12:56 faxfrmt01 FaxGetty[1307]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Apr 9 15:12:56 faxfrmt01 FaxGetty[1307]: DELAY 10 ms Apr 9 15:12:56 faxfrmt01 FaxGetty[1307]: MODEM flush i/o Apr 9 15:12:56 faxfrmt01 FaxGetty[1307]: <-- [4:ATZ\r] Apr 9 15:12:59 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:12:59 faxfrmt01 FaxGetty[1307]: DELAY 3000 ms Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [9:AT#CID=1\r] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [8:AT#CID=1] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATE0\r] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [4:ATE0] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATV1\r] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:13:02 faxfrmt01 FaxGetty[1307]: <-- [5:ATQ0\r] Apr 9 15:13:03 faxfrmt01 FaxGetty[1307]: --> [2:OK] Apr 9 15:13:03 faxfrmt01 FaxGetty[1307]: <-- [7:ATS0=0\r] Any tips whats wrong that it doesn't answer ? Regards, Ulf. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Prev by Date: Re: [hylafax-users] Seeking clarification on installing hylafax.
- Next by Date: [hylafax-users] possibly OT - configuring router to support hylafax data connection.
- Previous by thread: Re: [hylafax-users] Problems with hylafax 4.1.8 and answering
- Next by thread: [hylafax-users] How do I set the maximum number of faxes in queue?
- Index(es):
Project hosted by iFAX Solutions