[hylafax-users] AW: Still not Receiving/Sending Faxes

[Egemen Öztan <e.oeztan@xxxxxxxxxxxxxx>]

First of all, thanks for your hints all. 

> 
> (...)Include the tag RingsBeforeAnswer 
> in your config.ttyXX file and see if at least the server receive fax.
I did it, still nothing changed
 
>(...)Maybe modem flow control issue?
>Modem in Class 2 instead of 1?
Neighter of them work.

>Behind a PBX?
It is.

>Sharing line with something that shouldn't be there?
I checked this as well but the answer must be no. I made a following test:

- I selected a free analog sleeve on the PBX with the dialnumber 544
- here I connected the modem which on the other side was connected to a w2k
box
- I installed and configured the fax drivers in the w2k machine
- Everything is OK

- I connected the hylafax modem to another empty sleeve
- then sent the testfax to that number
- the modem dials the number and after a while of non-answering dialtones
received by the hylafax-modem log states again ERR No carrier detected, here
is the log:

Mar 10 11:48:10.47: [28709]: SESSION BEGIN 00000015 544
Mar 10 11:48:10.47: [28709]: HylaFAX (tm) Version 4.1.3
Mar 10 11:48:10.47: [28709]: SEND FAX: JOB 9 DEST 544 COMMID 00000015 DEVICE
'/dev/ttyS1'
Mar 10 11:48:10.47: [28709]: MODEM set DTR OFF
Mar 10 11:48:10.47: [28709]: DELAY 75 ms
Mar 10 11:48:10.55: [28709]: MODEM set DTR ON
Mar 10 11:48:10.55: [28709]: DELAY 2600 ms
Mar 10 11:48:13.15: [28709]: MODEM set baud rate: 19200 baud, input flow
RTS/CTS, output flow RTS/CTS
Mar 10 11:48:13.15: [28709]: MODEM flush i/o
Mar 10 11:48:13.15: [28709]: <-- [4:ATZ\r]
Mar 10 11:48:13.17: [28709]: --> [3:ATZ]
Mar 10 11:48:13.17: [28709]: --> [2:OK]
Mar 10 11:48:13.17: [28709]: DELAY 3000 ms
Mar 10 11:48:16.17: [28709]: <-- [5:ATE0\r]
Mar 10 11:48:16.18: [28709]: --> [4:ATE0]
Mar 10 11:48:16.19: [28709]: --> [2:OK]
Mar 10 11:48:16.19: [28709]: <-- [5:ATV1\r]
Mar 10 11:48:16.21: [28709]: --> [2:OK]
Mar 10 11:48:16.21: [28709]: <-- [5:ATQ0\r]
Mar 10 11:48:16.22: [28709]: --> [2:OK]
Mar 10 11:48:16.22: [28709]: <-- [7:ATS0=0\r]
Mar 10 11:48:16.24: [28709]: --> [2:OK]
Mar 10 11:48:16.24: [28709]: <-- [7:ATS8=2\r]
Mar 10 11:48:16.26: [28709]: --> [2:OK]
Mar 10 11:48:16.26: [28709]: <-- [8:ATS7=60\r]
Mar 10 11:48:16.28: [28709]: --> [2:OK]
Mar 10 11:48:16.28: [28709]: <-- [6:AT\Q3\r]
Mar 10 11:48:16.30: [28709]: --> [2:OK]
Mar 10 11:48:16.30: [28709]: <-- [6:AT&D3\r]
Mar 10 11:48:16.32: [28709]: --> [2:OK]
Mar 10 11:48:16.32: [28709]: <-- [6:AT&C1\r]
Mar 10 11:48:16.34: [28709]: --> [2:OK]
Mar 10 11:48:16.34: [28709]: <-- [12:AT+FCLASS=1\r]
Mar 10 11:48:16.37: [28709]: --> [2:OK]
Mar 10 11:48:16.37: [28709]: <-- [7:ATL1M1\r]
Mar 10 11:48:16.39: [28709]: --> [2:OK]
Mar 10 11:48:16.39: [28709]: STATE CHANGE: RUNNING -> SENDING
Mar 10 11:48:16.39: [28709]: MODEM input buffering enabled
Mar 10 11:48:16.39: [28709]: <-- [12:AT+FCLASS=1\r]
Mar 10 11:48:16.51: [28709]: --> [2:OK]
Mar 10 11:48:16.51: [28709]: DIAL 544
Mar 10 11:48:16.51: [28709]: <-- [8:ATDT544\r]
Mar 10 11:48:16.63: [28709]: --> [10:NO CARRIER]
Mar 10 11:48:16.63: [28709]: SEND FAILED: JOB 9 DEST 544 ERR No carrier
detected
Mar 10 11:48:16.63: [28709]: <-- [5:ATH0\r]
Mar 10 11:48:16.74: [28709]: --> [2:OK]
Mar 10 11:48:16.74: [28709]: MODEM set DTR OFF
Mar 10 11:48:16.74: [28709]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 10 11:48:16.74: [28709]: SESSION END

>Try upgrading.
>
>If the problem persists in HylaFAX 4.1.8 or HylaFAX CVS HEAD then I'll 
>look into the code for you.
I will try this now.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*