[hylafax-users] USR Faxing problem

["Stephen Davey" <stephend@xxxxxxxxxxxxxx>]

Hi ,

I have setup Hylafax, and all looks ok, except when the modem connects to
the remote fax machine/fax modem,
it connects for about 4 seconds and hangs up, I have included the log from
the log file.
Hylafax also reports that the fax was sent successfully, but it's not sent
at all.

This is all the information I could collect about the modem, I have tried
both Class 1 and 2.0 with the same result.

Thank you for any assistance.


HylaFAX (tm) Version 4.1.8
Modem Type :  "3Com US Robotics 56K Message Modem"

MODEM USR U.S. Robotics 56K Message Rev. 14.10.1/Configuration Profile...
Product type           ANZA External
Product ID:            04566801
Options                V32bis,V.80,V.34+,x2,V.90
Fax Options            Class 1/Class 2.0
Line Options           Caller ID
Voice Options          Speakerphone,TAD
Clock Freq             92.0Mhz
EPROM                  256k
RAM                    32k
FLASH date             3/2/99
FLASH rev              14.10.1
DSP date               3/2/99
DSP rev                14.10.1



Log File
----------------------------------------------------------------------------
------------------------
Feb 28 14:11:36.80: [11331]: SESSION BEGIN 000000025 403097596077
Feb 28 14:11:36.80: [11331]: HylaFAX (tm) Version 4.1.8
Feb 28 14:11:36.80: [11331]: SEND FAX: JOB 19 DEST 097596077 COMMID
000000025 DEVICE '/dev/ttyS0'
Feb 28 14:11:36.80: [11331]: DELAY 75 ms
Feb 28 14:11:36.87: [11331]: DELAY 2600 ms
Feb 28 14:11:40.48: [11331]: DELAY 10 ms
Feb 28 14:11:40.49: [11331]: <-- [4:ATZ\r]
Feb 28 14:11:40.63: [11331]: --> [2:OK]
Feb 28 14:11:40.63: [11331]: DELAY 3000 ms
Feb 28 14:11:43.63: [11331]: <-- [5:ATE0\r]
Feb 28 14:11:43.77: [11331]: --> [4:ATE0]
Feb 28 14:11:43.77: [11331]: --> [2:OK]
Feb 28 14:11:43.77: [11331]: <-- [5:ATV1\r]
Feb 28 14:11:43.91: [11331]: --> [2:OK]
Feb 28 14:11:43.91: [11331]: <-- [7:ATQ0X4\r]
Feb 28 14:11:44.05: [11331]: --> [2:OK]
Feb 28 14:11:44.05: [11331]: <-- [7:ATS0=0\r]
Feb 28 14:11:44.19: [11331]: --> [2:OK]
Feb 28 14:11:44.19: [11331]: <-- [7:ATS8=2\r]
Feb 28 14:11:44.33: [11331]: --> [2:OK]
Feb 28 14:11:44.33: [11331]: <-- [8:ATS7=60\r]
Feb 28 14:11:44.47: [11331]: --> [2:OK]
Feb 28 14:11:44.47: [11331]: <-- [12:AT&H2&I2&R1\r]
Feb 28 14:11:44.61: [11331]: --> [2:OK]
Feb 28 14:11:44.61: [11331]: <-- [11:ATS13=1&D2\r]
Feb 28 14:11:44.75: [11331]: --> [2:OK]
Feb 28 14:11:44.75: [11331]: <-- [6:AT&C1\r]
Feb 28 14:11:44.89: [11331]: --> [2:OK]
Feb 28 14:11:44.89: [11331]: <-- [12:AT+FCLASS=1\r]
Feb 28 14:11:45.03: [11331]: --> [2:OK]
Feb 28 14:11:45.03: [11331]: <-- [12:AT+FCLASS=0\r]
Feb 28 14:11:45.17: [11331]: --> [2:OK]
Feb 28 14:11:45.17: [11331]: <-- [5:ATM0\r]
Feb 28 14:11:45.31: [11331]: --> [2:OK]
Feb 28 14:11:45.32: [11331]: <-- [12:AT+FCLASS=1\r]
Feb 28 14:11:45.55: [11331]: --> [2:OK]
Feb 28 14:11:45.56: [11331]: DIAL 097596077
Feb 28 14:11:45.56: [11331]: <-- [14:ATDT097596077\r]
Feb 28 14:11:58.50: [11331]: --> [7:CONNECT]
Feb 28 14:11:59.73: [11331]: --> [2:OK]
Feb 28 14:11:59.73: [11331]: REMOTE CSI "Fax"
Feb 28 14:11:59.73: [11331]: <-- [9:AT+FRH=3\r]
Feb 28 14:11:59.75: [11331]: --> [7:CONNECT]
Feb 28 14:12:00.00: [11331]: --> [2:OK]
Feb 28 14:12:00.00: [11331]: REMOTE best rate 2400 bit/s
Feb 28 14:12:00.00: [11331]: REMOTE max page width 1728 pixels in 215 mm
Feb 28 14:12:00.00: [11331]: REMOTE max unlimited page length
Feb 28 14:12:00.01: [11331]: REMOTE best vres 7.7 line/mm
Feb 28 14:12:00.01: [11331]: REMOTE best format 2-D MR
Feb 28 14:12:00.01: [11331]: REMOTE best 0 ms/scanline
Feb 28 14:12:00.01: [11331]: USE 2400 bit/s
Feb 28 14:12:00.01: [11331]: USE 0 ms/scanline
Feb 28 14:12:00.01: [11331]: <-- [9:AT+FTH=3\r]
Feb 28 14:12:00.20: [11331]: --> [7:CONNECT]
Feb 28 14:12:00.20: [11331]: <-- data [3]
Feb 28 14:12:00.20: [11331]: <-- data [2]
Feb 28 14:12:01.38: [11331]: --> [2:OK]
Feb 28 14:12:01.38: [11331]: <-- [5:ATH0\r]
Feb 28 14:12:01.62: [11331]: --> [2:OK]
Feb 28 14:12:01.63: [11331]: SESSION END



Regards
Stephen Davey




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*