[hylafax-users] Error Receiving 2D-MMR from a HP G95 Fax

["Impact" <impactserv@xxxxxxxxxxx>]

Using hylafax 4.1.8-1rh8.
Digi Datafire modems in class 2.0
Receiving a fax from an HP officejet G95.  one page.
All that gets transmitted is a thin horizontal line.  Less than 1k pdf
file is generated.
The fax is received just fine if the modems are forced to answer in
2D-MR.
Session Trace below.
Any ideas?


Dec 13 15:30:09.58: [13782]: SESSION BEGIN 000000245 15138423721
Dec 13 15:30:09.58: [13782]: HylaFAX (tm) Version 4.1.8
Dec 13 15:30:09.58: [13782]: <-- [14:AT+FCC=,,,,;A\r]
Dec 13 15:30:09.58: [13782]: --> [11:NMBR=<NONE>]
Dec 13 15:30:15.47: [13782]: --> [74:+FHT: FF 03 40 20 20 20 20 20 20 20
20 20 20 20 20 20 20 54 43 41 50 4D 49]
Dec 13 15:30:15.75: [13782]: --> [26:+FHT: FF 13 80 00 EE FA 46]
Dec 13 15:30:20.54: [13782]: --> [74:+FHT: FF 03 40 20 20 20 20 20 20 20
20 20 20 20 20 20 20 54 43 41 50 4D 49]
Dec 13 15:30:20.80: [13782]: --> [26:+FHT: FF 13 80 00 EE FA 46]
Dec 13 15:30:21.72: [13782]: --> [4:+FCO]
Dec 13 15:30:21.72: [13782]: ANSWER: FAX CONNECTION  DEVICE
'/dev/ttyG000'
Dec 13 15:30:21.73: [13782]: STATE CHANGE: ANSWERING -> RECEIVING
Dec 13 15:30:21.73: [13782]: MODEM input buffering enabled
Dec 13 15:30:21.73: [13782]: RECV FAX: begin
Dec 13 15:30:23.31: [13782]: --> [74:+FHR: FF 03 43 31 20 20 20 20 20 20
20 20 20 20 20 20 20 20 20 20 20 20 20]
Dec 13 15:30:23.62: [13782]: --> [26:+FHR: FF 13 83 00 22 F8 44]
Dec 13 15:30:23.62: [13782]: --> [27:+FTI:"                   1"]
Dec 13 15:30:23.62: [13782]: REMOTE TSI "1"
Dec 13 15:30:23.62: [13782]: --> [20:+FCS:0,5,0,2,3,1,0,0]
Dec 13 15:30:23.62: [13782]: REMOTE wants 14400 bit/s
Dec 13 15:30:23.62: [13782]: REMOTE wants page width 1728 pixels in 215
mm
Dec 13 15:30:23.62: [13782]: REMOTE wants unlimited page length
Dec 13 15:30:23.62: [13782]: REMOTE wants 3.85 line/mm
Dec 13 15:30:23.62: [13782]: REMOTE wants 2-D MMR
Dec 13 15:30:23.62: [13782]: REMOTE wants T.30 Annex A, ECM
Dec 13 15:30:23.62: [13782]: --> [2:OK]
Dec 13 15:30:23.62: [13782]: <-- [7:AT+FDR\r]
Dec 13 15:30:28.08: [13782]: --> [14:+FHT: FF 13 84]
Dec 13 15:30:29.28: [13782]: --> [20:+FCS:0,5,0,2,3,1,0,0]
Dec 13 15:30:29.29: [13782]: REMOTE wants 14400 bit/s
Dec 13 15:30:29.29: [13782]: REMOTE wants page width 1728 pixels in 215
mm
Dec 13 15:30:29.29: [13782]: REMOTE wants unlimited page length
Dec 13 15:30:29.29: [13782]: REMOTE wants 3.85 line/mm
Dec 13 15:30:29.29: [13782]: REMOTE wants 2-D MMR
Dec 13 15:30:29.29: [13782]: REMOTE wants T.30 Annex A, ECM
Dec 13 15:30:29.29: [13782]: --> [7:CONNECT]
Dec 13 15:30:29.29: [13782]: RECV: begin page
Dec 13 15:30:29.29: [13782]: RECV: send trigger 022
Dec 13 15:30:29.29: [13782]: <-- data [1]
Dec 13 15:30:56.81: [13782]: RECV/CQ: Invalid EOL code word, row 0, x 0
Dec 13 15:30:56.81: [13782]: RECV/CQ: Bad 2D pixel count, row 0, got 0,
expected 1728
Dec 13 15:30:56.81: [13782]: RECV/CQ: Invalid EOL code word, row 1, x 0
Dec 13 15:30:56.81: [13782]: RECV/CQ: Bad 2D pixel count, row 1, got 0,
expected 1728
Dec 13 15:30:58.27: [13782]: RECV: 217 bytes of data, 2 total lines
Dec 13 15:30:58.27: [13782]: --> [26:+FHR: FF 13 BF 2F 00 00 63]
Dec 13 15:30:58.27: [13782]: --> [14:+FPS:1,1,1,0,0]
Dec 13 15:30:58.27: [13782]: --> [6:+FET:2]
Dec 13 15:30:58.27: [13782]: RECV recv EOP (no more pages or documents)
Dec 13 15:30:58.27: [13782]: --> [2:OK]
Dec 13 15:30:58.27: [13782]: RECV send MCF (message confirmation)
Dec 13 15:30:58.27: [13782]: RECV FAX (000000245): from 1, page 1 in
0:35, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
Dec 13 15:30:58.27: [13782]: RECV FAX (000000245):
recvq/fax000000082.tif from 1, route to <unspecified>, 1 pages in 0:37
Dec 13 15:30:58.27: [13782]: <-- [7:AT+FDR\r]
Dec 13 15:30:59.59: [13782]: --> [14:+FHT: FF 13 8C]
Dec 13 15:30:59.59: [13782]: RECV FAX: bin/faxrcvd
"recvq/fax000000082.tif" "ttyG000" "000000245" "" "8423721" ""
Dec 13 15:31:00.51: [13782]: RECV FAX: end
Dec 13 15:31:00.51: [13782]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*