[hylafax-users] consecutive bad lines > total bad lines?

[Giulio Orsero <giulioo@xxxxxxxxx>]

cvs20031206, rh6x, rockwell class1.

RECV: 2291 total lines, 0 bad lines, 1 consecutive bad lines

This is the first time I noticed this and we are mostly send-only so I don't
know if this is common (I have a total of 4 receive logs without ecm and
this is the only one showing this behavior)

Dec 11 10:14:49.37: [ 5767]: REMOTE wants 14400 bit/s
Dec 11 10:14:49.37: [ 5767]: REMOTE wants A4 page width (215 mm)
Dec 11 10:14:49.37: [ 5767]: REMOTE wants unlimited page length
Dec 11 10:14:49.37: [ 5767]: REMOTE wants 7.7 line/mm
Dec 11 10:14:49.37: [ 5767]: REMOTE wants 1-D MH
Dec 11 10:14:49.37: [ 5767]: RECV training at v.17 14400 bit/s
Dec 11 10:14:49.37: [ 5767]: <-- [11:AT+FRM=145\r]
Dec 11 10:14:51.16: [ 5767]: --> [7:CONNECT]
Dec 11 10:14:52.75: [ 5767]: RECV: TCF 2809 bytes, 0% non-zero, 2774
zero-run
Dec 11 10:14:52.75: [ 5767]: --> [10:NO CARRIER]
Dec 11 10:14:52.75: [ 5767]: DELAY 75 ms
Dec 11 10:14:52.83: [ 5767]: TRAINING succeeded
Dec 11 10:14:52.83: [ 5767]: <-- [9:AT+FTH=3\r]
Dec 11 10:14:52.88: [ 5767]: --> [7:CONNECT]
Dec 11 10:14:52.88: [ 5767]: <-- data [3]
Dec 11 10:14:52.88: [ 5767]: <-- data [2]
Dec 11 10:14:54.20: [ 5767]: --> [2:OK]
Dec 11 10:14:54.20: [ 5767]: <-- [11:AT+FRM=146\r]
Dec 11 10:14:54.98: [ 5767]: --> [7:CONNECT]
Dec 11 10:14:54.98: [ 5767]: RECV: begin page
Dec 11 10:15:01.19: [ 5767]: RECV: 2291 total lines, 0 bad lines, 1
consecutive bad lines
Dec 11 10:15:01.19: [ 5767]: RECV: end page
Dec 11 10:15:01.19: [ 5767]: --> [10:NO CARRIER]
Dec 11 10:15:01.19: [ 5767]: <-- [9:AT+FRH=3\r]
Dec 11 10:15:01.62: [ 5767]: --> [7:CONNECT]
Dec 11 10:15:02.59: [ 5767]: --> [2:OK]
Dec 11 10:15:02.59: [ 5767]: RECV recv EOP (no more pages or documents)
Dec 11 10:15:02.59: [ 5767]: <-- [9:AT+FRS=7\r]
Dec 11 10:15:02.82: [ 5767]: --> [2:OK]
Dec 11 10:15:02.82: [ 5767]: <-- [9:AT+FTH=3\r]
Dec 11 10:15:02.98: [ 5767]: --> [7:CONNECT]
Dec 11 10:15:02.98: [ 5767]: <-- data [3]
Dec 11 10:15:02.98: [ 5767]: <-- data [2]
Dec 11 10:15:04.29: [ 5767]: --> [2:OK]
Dec 11 10:15:04.29: [ 5767]: RECV send MCF (message confirmation)


-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*