HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] [Fwd: facsimile not received]
Below is the log of a fax that didn't work. However the other end says
the fax did go through; they repeated it several times. Its hylafax
4.1.7 with a USR modem in class 1. I have a multitech modem on the way,
will that fix these kinds of errors? Thanks.
An attempt to receive facsimile on ttyS0 failed because:
COMREC received DCN
---- Transcript of session follows ----
Dec 08 15:00:27.20: [10358]: SESSION BEGIN 00002601 XXXXXXXX
Dec 08 15:00:27.20: [10358]: HylaFAX (tm) Version 4.1.7
Dec 08 15:00:27.20: [10358]: <-- [4:ATA\r]
Dec 08 15:00:32.75: [10358]: --> [7:CONNECT]
Dec 08 15:00:32.75: [10358]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Dec 08 15:00:32.75: [10358]: RECV FAX: begin
Dec 08 15:00:32.78: [10358]: --> [7:CONNECT]
Dec 08 15:00:34.73: [10358]: --> [2:OK]
Dec 08 15:00:34.73: [10358]: <-- [9:AT+FRH=3\r]
Dec 08 15:00:37.83: [10358]: --> [0:]
Dec 08 15:00:37.83: [10358]: MODEM <Empty line>
Dec 08 15:00:37.84: [10358]: --> [2:OK]
Dec 08 15:00:37.84: [10358]: DELAY 1500 ms
Dec 08 15:00:39.34: [10358]: <-- [9:AT+FTH=3\r]
Dec 08 15:00:39.38: [10358]: --> [7:CONNECT]
Dec 08 15:00:39.41: [10358]: --> [7:CONNECT]
Dec 08 15:00:41.46: [10358]: --> [2:OK]
Dec 08 15:00:41.46: [10358]: <-- [9:AT+FRH=3\r]
Dec 08 15:00:42.29: [10358]: --> [7:CONNECT]
Dec 08 15:00:43.74: [10358]: --> [2:OK]
Dec 08 15:00:43.74: [10358]: REMOTE TSI "XXXXXXXX"
Dec 08 15:00:43.74: [10358]: <-- [9:AT+FRH=3\r]
Dec 08 15:00:43.76: [10358]: --> [7:CONNECT]
Dec 08 15:00:44.11: [10358]: --> [2:OK]
Dec 08 15:00:44.11: [10358]: REMOTE wants 9600 bit/s
Dec 08 15:00:44.11: [10358]: REMOTE wants page width 1728 pixels in 215 mm
Dec 08 15:00:44.11: [10358]: REMOTE wants unlimited page length
Dec 08 15:00:44.11: [10358]: REMOTE wants 3.85 line/mm
Dec 08 15:00:44.11: [10358]: REMOTE wants 2-D MR
Dec 08 15:00:44.11: [10358]: RECV training at v.29 9600 bit/s
Dec 08 15:00:44.11: [10358]: <-- [10:AT+FRM=96\r]
Dec 08 15:00:44.46: [10358]: --> [7:CONNECT]
Dec 08 15:00:46.03: [10358]: RECV: TCF 1892 bytes, 4% non-zero, 1806 zero-run
Dec 08 15:00:46.03: [10358]: --> [10:NO CARRIER]
Dec 08 15:00:46.03: [10358]: DELAY 75 ms
Dec 08 15:00:46.11: [10358]: TRAINING succeeded
Dec 08 15:00:46.11: [10358]: <-- [9:AT+FTH=3\r]
Dec 08 15:00:46.31: [10358]: --> [7:CONNECT]
Dec 08 15:00:47.48: [10358]: --> [2:OK]
Dec 08 15:00:47.48: [10358]: <-- [10:AT+FRM=96\r]
Dec 08 15:00:48.35: [10358]: --> [7:CONNECT]
Dec 08 15:00:48.35: [10358]: RECV: begin page
Dec 08 15:01:22.61: [10358]: RECV: 1096 total lines, 6 bad lines, 6 consecutive bad lines
Dec 08 15:01:22.61: [10358]: RECV: REJECT page quality, 6-line run (max 5)
Dec 08 15:01:22.61: [10358]: RECV: end page
Dec 08 15:01:22.72: [10358]: --> [10:NO CARRIER]
Dec 08 15:01:22.72: [10358]: <-- [9:AT+FRH=3\r]
Dec 08 15:01:23.08: [10358]: --> [7:CONNECT]
Dec 08 15:01:23.86: [10358]: --> [2:OK]
Dec 08 15:01:23.86: [10358]: RECV recv EOP (no more pages or documents)
Dec 08 15:01:23.86: [10358]: <-- [9:AT+FRS=7\r]
Dec 08 15:01:23.97: [10358]: --> [2:OK]
Dec 08 15:01:23.97: [10358]: <-- [9:AT+FTH=3\r]
Dec 08 15:01:24.17: [10358]: --> [7:CONNECT]
Dec 08 15:01:25.34: [10358]: --> [2:OK]
Dec 08 15:01:25.34: [10358]: RECV send RTN (retrain negative)
Dec 08 15:01:25.34: [10358]: <-- [9:AT+FRH=3\r]
Dec 08 15:01:25.93: [10358]: --> [7:CONNECT]
Dec 08 15:01:26.69: [10358]: --> [2:OK]
Dec 08 15:01:26.69: [10358]: RECV recv DCN
Dec 08 15:01:26.69: [10358]: RECV FAX (00002601): recvq/fax00944.tif from "XXXXXXXX" route to <unspecified>, 0 pages in 0:54
Dec 08 15:01:26.69: [10358]: RECV FAX: COMREC received DCN
Dec 08 15:01:26.69: [10358]: <-- [9:AT+FTH=3\r]
Dec 08 15:01:26.89: [10358]: --> [7:CONNECT]
Dec 08 15:01:28.06: [10358]: --> [2:OK]
Dec 08 15:01:28.06: [10358]: RECV FAX (00002601): session with XXXXXXXX terminated abnormally: COMREC received DCN
Dec 08 15:01:28.06: [10358]: RECV FAX: bin/faxrcvd "recvq/fax00944.tif" "ttyS0" "00002601" "COMREC received DCN" "" ""
--
Steven Kurylo
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*