Re: [hylafax-users] Problem using hylafax & capi4hylafax

[Holger Raschke <holger.raschke@xxxxxxxxxxxxxx>]

> Yes, I did so ....
> My mods:
> - 0777 for /dev/capi20
mine are 600, user=uucp group=root
> - added this line to /va/spool/fax/etc/config:  SendFaxCmd:
> /usr/bin/c2faxsend
> - changed permissions of /usr/bin/c2faxsend to 0777
mine are 755, user/group = root
> - add a symb. link /dev/faxCAPI to /dev/capi20
why did you do that? I think this is not documented with capi4linux.
The CAPI-drivers can't be directly used as a modem.
> - the maschines' ip-adresses are in /var/spool/fax/etc/hosts.hfaxd
> - the users are members of group "dialout"

To check if you have a handling problem with hylafax or with windows 
clientsoftware:
Can you send a fax from the commandline with sendfax?

if no: Was capi4hylafax installed to be used with hylafax?

did you run "faxaddmodem /dev/faxCAPI"? this won't work. Run "faxsetup" 
up to the point, where faxaddmodem should be called, and say no. Place 
your config.faxCAPI in the etc-dir and start c2faxrecv.

The logging you provided leads to faxsend, so there seems to be a 
problem with handling the sending process (may be modem communication).

--
holger


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*