HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Problemas para recibir Fax



Hola Lista,

Estoy usando hylafax 4.1.7, puedo enviar fax perfectamente pero cuando
quiero recibir un fax me da un error como "Failure to receive silence", uso
faxgetty para recibir, uso un modem externo encore, ya he leido los FAQ de
la pagina, documentacion, etc y no encuentro cual es el error. 
Les adjunto el log del error que da a la hora de recibir un fax.	

Gracias de antemano por la ayuda


 <<error.txt>> 
An attempt to receive facsimile on ttyS0 failed because:

    Failure to receive silence.

    ---- Transcript of session follows ----

Oct 27 18:48:49.47: [  904]: SESSION BEGIN 00000032 506002223752
Oct 27 18:48:49.47: [  904]: HylaFAX (tm) Version 4.1.7
Oct 27 18:48:49.47: [  904]: <-- [4:ATA\r]
Oct 27 18:48:52.49: [  904]: --> [7:CONNECT]
Oct 27 18:48:52.50: [  904]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Oct 27 18:48:52.50: [  904]: RECV FAX: begin
Oct 27 18:48:54.13: [  904]: --> [7:CONNECT]
Oct 27 18:48:54.54: [  904]: --> [2:OK]
Oct 27 18:48:54.55: [  904]: <-- [9:AT+FRH=3\r]
Oct 27 18:48:54.58: [  904]: --> [7:CONNECT]
Oct 27 18:48:57.07: [  904]: --> [10:NO CARRIER]
Oct 27 18:48:57.08: [  904]: MODEM No carrier
Oct 27 18:48:57.08: [  904]: DELAY 1500 ms
Oct 27 18:48:58.57: [  904]: <-- [9:AT+FTH=3\r]
Oct 27 18:48:58.62: [  904]: --> [7:CONNECT]
Oct 27 18:49:00.36: [  904]: --> [7:CONNECT]
Oct 27 18:49:00.77: [  904]: --> [2:OK]
Oct 27 18:49:00.78: [  904]: <-- [9:AT+FRH=3\r]
Oct 27 18:49:01.32: [  904]: --> [7:CONNECT]
Oct 27 18:49:03.14: [  904]: --> [2:OK]
Oct 27 18:49:03.15: [  904]: REMOTE TSI "2577000 2223752"
Oct 27 18:49:03.15: [  904]: <-- [9:AT+FRH=3\r]
Oct 27 18:49:03.17: [  904]: --> [7:CONNECT]
Oct 27 18:49:03.46: [  904]: --> [2:OK]
Oct 27 18:49:03.47: [  904]: REMOTE wants 9600 bit/s
Oct 27 18:49:03.47: [  904]: REMOTE wants page width 1728 pixels in 215 mm
Oct 27 18:49:03.47: [  904]: REMOTE wants unlimited page length
Oct 27 18:49:03.47: [  904]: REMOTE wants 3.85 line/mm
Oct 27 18:49:03.47: [  904]: REMOTE wants 2-D MR
Oct 27 18:49:03.47: [  904]: RECV training at v.29 9600 bit/s
Oct 27 18:49:03.47: [  904]: <-- [10:AT+FRM=96\r]
Oct 27 18:49:04.04: [  904]: --> [7:CONNECT]
Oct 27 18:49:05.56: [  904]: RECV: TCF 1792 bytes, 0% non-zero, 1778 zero-run
Oct 27 18:49:05.56: [  904]: --> [10:NO CARRIER]
Oct 27 18:49:05.57: [  904]: DELAY 75 ms
Oct 27 18:49:05.64: [  904]: TRAINING succeeded
Oct 27 18:49:05.65: [  904]: <-- [9:AT+FTH=3\r]
Oct 27 18:49:05.68: [  904]: --> [7:CONNECT]
Oct 27 18:49:06.89: [  904]: --> [2:OK]
Oct 27 18:49:06.90: [  904]: <-- [10:AT+FRM=96\r]
Oct 27 18:49:07.62: [  904]: --> [7:CONNECT]
Oct 27 18:49:07.63: [  904]: RECV: begin page
Oct 27 18:49:27.79: [  904]: RECV: 1069 total lines, 0 bad lines, 0 consecutive bad lines
Oct 27 18:49:27.79: [  904]: RECV: end page
Oct 27 18:49:27.79: [  904]: --> [10:NO CARRIER]
Oct 27 18:49:27.79: [  904]: <-- [9:AT+FRH=3\r]
Oct 27 18:49:27.82: [  904]: --> [7:CONNECT]
Oct 27 18:49:29.09: [  904]: --> [2:OK]
Oct 27 18:49:29.10: [  904]: RECV recv EOP (no more pages or documents)
Oct 27 18:49:29.10: [  904]: <-- [9:AT+FRS=7\r]
Oct 27 18:49:59.10: [  904]: MODEM <Timeout>
Oct 27 18:49:59.10: [  904]: RECV FAX (00000032): recvq/fax00029.tif from 2577000 2223752, route to <unspecified>, 0 pages in 1:07
Oct 27 18:49:59.10: [  904]: RECV FAX: Failure to receive silence.
Oct 27 18:49:59.10: [  904]: <-- [9:AT+FTH=3\r]
Oct 27 18:49:59.11: [  904]: --> [2:OK]
Oct 27 18:49:59.12: [  904]: RECV FAX (00000032): session with 2577000 2223752 terminated abnormally: Failure to receive silence.
Oct 27 18:49:59.12: [  904]: RECV FAX: bin/faxrcvd "recvq/fax00029.tif" "ttyS0" "00000032" "Failure to receive silence." "" ""



Project hosted by iFAX Solutions