HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Repost Faxgetty not answering



Using Hylafax 4.1.1
All of the basics seem to be in place but Faxgetty has not answered the
incoming call ...yet. When I turn off Faxgetty and go into Minicom, the
indicators are good. An incoming call will display as RING3. When I do ATA,
the modem will answer the call. With Faxgetty running and with an incoming call
the LED on the modem activates but nothing happens. The Log shows 


Oct 27 06:11:19 Poncho HylaFAX[6899]: HylaFAX SNPP Protocol Server:
restarted.
Oct 27 06:11:19 Poncho FaxGetty[4357]: CLOSE /dev/usb/ttyACM0
Oct 27 06:11:19 Poncho FaxGetty[6901]: OPEN /dev/usb/ttyACM0  HylaFAX (tm)
Version 4.1.1
Oct 27 06:11:34 Poncho FaxGetty[6901]: MODEM CONEXANT AC/K56/V2.300-V90_2M_DLP

According to the manufacturer this is a Rockwell Modem. See config.ttyACMO
below. It seems Faxgetty needs another bit of information to pick up the line and answer. 

I have tried to use faxanswer modem, without success.
magpie@Poncho:~$ faxanswer /dev/usb/ttyACM0
dev_FIFO._dev_usb_ttyACM0: open: No such file or directory

In addition I tried the modem as Class2, but this did not help.
Any suggestions ?

Brian.

=========================================
config.ttyACM0


CountryCode:            -
AreaCode:               -
FAXNumber:              XXXXXXXX
LongDistancePrefix:     -
InternationalPrefix:    -
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         0x08501
RecvFileMode:           0640
LogFileMode:            0640
DeviceMode:             0660
RingsBeforeAnswer:      2
RingFax:                RING3
SpeakerVolume:          off
GettyArgs:              "-r -b %l"
LocalIdentifier:        "Brian Marr"
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              38400           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
#ModemHardFlowCmd:      AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s          # T for tone dialing
       

-- 
Powered by Suse Linux 8.0

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions