Re: [hylafax-users] RE : Help Hylafax setup with HSF Connexant Modem !!

["Matt Yeager" <hylafax-lists@xxxxxxxxxxxxxxxxxx>]

Hmm..no idea there. Are you leaving it as a tif..or converting it to
something else later? I had a problem with tif's looking okay as tif's
..but when I converted them to pdf, they would look corrupted. I've got
that problem fixed now though. 

Has anyone with a HSF/HCF modem (linuxant drivers) had problems with
frequent wedging often?

	-Matt



-----Original Message-----
From: Sébastien CRAMATTE [mailto:s.cramatte@xxxxxxxxxxx] 
Sent: Friday, October 17, 2003 9:15 AM
To: HylaFax Lists
Subject: RE : [hylafax-users] Help Hylafax setup with HSF Connexant
Modem !!


I've got blank A4 page with few black lines and bar on top of this ...
If fax is received from an ISDN transmission the result is perfect ... I
don't have any "sand" on my analogic line ...



-----Message d'origine-----
De : Matt Yeager [mailto:hylafax-lists@xxxxxxxxxxxxxxxxxx] 
Envoyé : vendredi 17 octobre 2003 16:04
À : 'Sébastien CRAMATTE'
Cc : hylafax-users@xxxxxxxxxxx
Objet : RE: [hylafax-users] Help Hylafax setup with HSF Connexant Modem
!!


Strangly, I'm in a somewhat similar scenario. I have just recently setup
a new fax server with 3 HCF Conexant modems using drivers from
linuxant.com. On one modem, the only one currently being used, I've
gotten a "wedged modem" status during the night the past 2 days. I'm not
sure if it's cheap hardware or the driver. I havn't noticed any
transmission quality error.  What kind of bad quality are you having? Is
it visable in the tif file?

		-Matt


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Sébastien
CRAMATTE
Sent: Friday, October 17, 2003 8:50 AM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Help Hylafax setup with HSF Connexant Modem !!


Hello,

I've just installed my hylafax server with my Olitec PCI V92 Ready card
(this an HSF Connexant chipset) so I've bougth the specific driver to
linuxant.com

All seems to work properly except in receiving mode. It's seems to be a
transmission quality error or something like this. Does anyone have got
an Ideao to solve this probleme or a correct Hylafax config file for
this kind of modem ?

Best regards

Sébastien




____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*