HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb



At 17:11 07-10-2003 +0200, Andrea Nicolini wrote:
On Tue, 2003-10-07 at 17:05, Steve Tuckner wrote:
> Is this in Class 1 or Class 2.. modes?
Well, I tried every class available (1,1.0,2,2.0,2.1).
At the moment I'm running one board in class1 and another in class2.1.
Both seems to behave in a similar way with incoming faxes (10% errors),
but with different error codes. For example in class2.1 I often get
"Unspecified Phase D error".

No offence.. but are you absolutely 100% sure the modems are faulty?


I have used the 2834ZDX in the past without much of a problem. I think I used a slightly modified version of the default config for the MT1432. Actually, I'm still using a slightly modified version with my new MT5600ZDXe. The reason for the swap was that a customer needed a good modem FAST :(

I don't count how many faxes are failing but I think it's about 1 or 2%, which is about the same rate (or even less then) normal faxes are doing.

I'm glad to see Steve Tuckner from MT has joined this list.



B.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions