Re: [hylafax-users] MultiTech MT5634ZBA-DID

["Jeff Pau" <jeff@xxxxxxxxxxxxxxx>]

I attached the config file here.  What sort of init string did you use?
I set it up on a receive-only environment using analog DDI.  I have a
little problem though.  The modem sometimes 'wedged' when it is idle for
a while, but on a retry, it will normally be ok.  Otherwise, it is ok.
Does any one have a similar problem?
Anyone, upgraded to the new firmware?

jeff

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Jeff Herring
Sent: Monday, September 29, 2003 9:50 PM
To: Jeff Pau
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] MultiTech MT5634ZBA-DID

At 04:04 PM 9/27/2003 +0800, Jeff Pau wrote:
>i got it working too.  what do you need for help?  what is your problem
now,
>if any?

No Problem, just wondering if any special configuration was done, either
on 
MODEM
or in Hylafax itself...e.g. Special Config file or other experiences
with 
this MODEM
and DID in general.


>----- Original Message -----
>From: "Jeff Herring" <jeffh@xxxxxxxxx>
>To: <hylafax-users@xxxxxxxxxxx>
>Sent: Saturday, September 27, 2003 1:47 AM
>Subject: [hylafax-users] MultiTech MT5634ZBA-DID
>
>
> > Flame On if it's been answered before...
> >
> > Does anyone have (analog) DID working on the MT5643ZBA-DID modem?
> > Working config / modified faxrcvd?
> >
> > -Jeff H.
> >
> > --------------------------------------
> > Jeff Herring  /  jeffh@xxxxxxxxx
> > Seacoast Laboratory Data Systems, Inc.
> > --------------------------------------
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
>_______________________
> >   To subscribe/unsubscribe, click
>http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
>/dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxxxxx*
> >
> >

--------------------------------------
Jeff Herring  /  jeffh@xxxxxxxxx
Seacoast Laboratory Data Systems, Inc.
Voice:  603 431 4114  x14
FAX:    603 431 2112
--------------------------------------


____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxxxxx*

Attachment: config.ttyS1
Description: Binary data