HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] DataFire RAS 30 PE1




 You get a funny response (OK) to your dial command. You should get
something like 'BUSY' or 'CONNECT' or 'NODIALTONE'.... 

 Sedat YILMAZER

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of maurycy widera
Sent: Friday, September 26, 2003 12:42 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] DataFire RAS 30 PE1

hello!

I've got problem with sending faxes from Hylafax:
I'm using Digi DataFire RAS30 PE1 - 30modems on E1 line.

Modem is initializing without any error. 
I can receive faxes with no problems.
If I call:
-hylafax send :ATDTxxxx 
-in the same moment hangup (probably by clearing DTR)
and faild with "no carrier detected"

If I set 10ms delay after every command - the hangup is 10ms later.

I tried type every command in the same order in minicom - then
everything works ok - I can dialout without any disconections.

---- form session log-----
Sep 26 10:48:34.45: [10587]: <-- [23:AT+FCC=1,5,2,2,3,1,0,0\r]
Sep 26 10:48:34.72: [10587]: --> [2:OK]
Sep 26 10:48:34.72: [10587]: DELAY 10 ms
Sep 26 10:48:34.73: [10587]: <-- [17:AT+FLI="Linia00"\r]
Sep 26 10:48:35.00: [10587]: --> [2:OK]
Sep 26 10:48:35.00: [10587]: DIAL 222
Sep 26 10:48:35.00: [10587]: DELAY 10 ms
Sep 26 10:48:35.01: [10587]: <-- [8:atdt222\r]
Sep 26 10:48:44.70: [10587]: --> [2:OK]
Sep 26 10:48:44.70: [10587]: SEND FAILED: JOB 13 DEST 222 ERR No carrier
detected
Sep 26 10:48:44.70: [10587]: DELAY 10 ms
Sep 26 10:48:44.71: [10587]: <-- [5:ATH0\r]
Sep 26 10:48:44.99: [10587]: --> [2:OK]
---- form session log-----


hylafax is sending to modem and then hangup
---
ATZ
ATE0
ATV1
ATQ0
ATS0=0
ATS8=2
ATS7=60
AT&K3

AT+FCLASS=2.0
AT+FLO=2
AT+FPP=0
AT+FBO=0
AT+FCT=30
AT+FCQ=2,2
AT+FNR=1,1,1,1
AT+FAP=1,1,1
AT+FIE=0
AT+FCC=1,5,2,2,3,1,0,0
AT+FLI="xxx"
ATDT222
ATH0
[...]
---


---from serial trace---
     79716.900 > AT+FBU=1.
     79717.100 < ..OK..
     79717.200 > AT+FCC=1,5,2,2,3,1,0,0.
     79717.400 < ..OK..
     79717.500 > AT+FLI="Linia00".
     79717.700 < ..OK..
     79717.800 > atdt222.
     79727.300 < ..OK..
     79727.300 C  +RTS +CTS -dtr +DSR -dcd
     79727.400 > ATH0.
     79727.400 C  +RTS +CTS +DTR +DSR -dcd
     79727.600 < ..OK..
-----------------------------

--from config.ttyG0_00----
[...]
ModemType:              Class2.0        # use this to supply a hint
ModemRate:              19200
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3

Class2APCmd:            AT+FAP=1,1,1
Class2CQCmd:            AT+FCQ=2,2

# versions that respond to AT+FFC=? with non-zero data support RTFCC
Class2RTFCC:            yes

# unfortunately, HylaFAX can't currently receive in MMR
ModemAnswerCmd:         AT+FCC=,,,,1;A

Class2NFLOCmd:  AT+FLO=0 # set no flow control command
Class2SFLOCmd:  AT+FLO=1 # set software flow control command
Class2HFLOCmd:  AT+FLO=2 # set hardware flow control command

# string, command for dialing (%s for number to dial)
ModemDialCmd:                   atdt%s
ModemDialResponseTimeout:       250000  # integer, dialing command
timeout (ms)
------------------------------


any idea?

--
maurycy. 



____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions