[hylafax-users] FW: Problem with PS to fax conversion

["Anthony Engelbrecht" <anthonye@xxxxxxxxxxxxxx>]

Anyone able to assist or give advice?

 

-----Original Message-----
From: Anthony Engelbrecht [mailto:anthonye@xxxxxxxxxxxxxx]
Sent: 22 September 2003 07:41 AM
To: 'hylafax-users@xxxxxxxxxxx'
Subject: Problem with PS to fax conversion

Hi,

 

I use html2ps 1.0 to convert an HTML document to Postscript, before passing it onto the sendfax command. This seems to work fairly well except that about 40% of the outbound faxes then get a conversion error back from Hylafax.

 

Again, about 50-60% go out fine.

 

I have attached the Postscript file, as well as a copy of the mail sent to me from Hylafax.

 

Anyone got any solutions or ideas?

 

Regards

Anthony

--- Begin Message ---

• To: <anthonye@xxxxxxxxxxxxxxxxx>
• Subject: 0062529_45 to 0117263672 failed
• From: "Facsimile Agent" <fax@xxxxxxxxxxxxxx>
• Date: Sun, 21 Sep 2003 15:15:10 +0200

Your facsimile job to 0117263672 was not sent because document conversion
to facsimile failed.  The output from the converter program was:

Error: /rangecheck in --put--
Operand stack:
   --nostringval--   11.0   --nostringval--   31   3
Execution stack:
   %interp_exit
.runexec2   --nostringval--   --nostringval--   --nostringval--   2
%stopped_push   --nostringval--   --nostringval--   --nostringval--   false
1   %stopped_push   1   3   %oparray_pop   1   3   %oparray_pop
.runexec2   --nostringval--   --nostringval--   --nostringval--   2
%stopped_push   --nostringval--   4   1   3   --nostringval--
%for_pos_int_continue   --nostringval--   2   1   1   --nostringval--
%for_pos_int_continue   32   1   39   --nostringval--
%for_pos_int_continue   3   1   15   --nostringval--
%for_pos_int_continue   --nostringval--   --nostringval--   --nostringval-- 
  --nostringval--   --nostringval--   --nostringval--
Dictionary stack:
   --dict:1056/1123(ro)(G)--   --dict:0/20(G)--   --dict:88/200(L)--   --dic
t:483/2000(L)--
Current allocation mode is local
Last OS error: 2
GNU Ghostscript 7.05: Unrecoverable error, exit code 1


Check any PostScript documents for non-standard fonts and invalid
constructs.

    ---- Unsent job status ----

   Destination: 0117263672
         JobID: 501
       GroupID: 501
        Sender: anthonye
      Mailaddr: anthonye@xxxxxxxxxxxxxxxxx
Submitted From: attunetech.com
    Page Width: 209 (mm)
   Page Length: 296 (mm)
    Resolution: 196 (lpi)
        Status: Error: /rangecheck in --put--
Operand stack:
   --nostringval--   11.0   --nostringval--   31   3
Execution stack:
   %interp_exit
.runexec2   --nostringval--   --nostringval--   --nostringval--   2
%stopped_push   --nostringval--   --nostringval--   --nostringval--   false
1   %stopped_push   1   3   %oparray_pop   1   3   %oparray_pop
.runexec2   --nostringval--   --nostringval--   --nostringval--   2
%stopped_push   --nostringval--   4   1   3   --nostringval--
%for_pos_int_continue   --nostringval--   2   1   1   --nostringval--
%for_pos_int_continue   32   1   39   --nostringval--
%for_pos_int_continue   3   1   15   --nostringval--
%for_pos_int_continue   --nostringval--   --nostringval--   --nostringval-- 
  --nostringval--   --nostringval--   --nostringval--
Dictionary stack:
   --dict:1056/1123(ro)(G)--   --dict:0/20(G)--   --dict:88/200(L)--   --dic
t:483/2000(L)--
Current allocation mode is local
Last OS error: 2
GNU Ghostscript 7.05: Unrecoverable error, exit code 1

       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc502.ps.501      72259 PostScript

--- End Message ---

Attachment: tmp.ps
Description: PostScript document