HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Fw: Class1.0 modem can't receive fax but it can send fax, why? help!



Hi Rubil,

please add a line:

SessionTracing:         0x4f

in your Class1 Modem config-file and try to send a fax then.
Have a look in the tracelog found in
log/c0000???.

If you still can't get any fax out, post the output of the file to the list.

HIH

-m


Am Montag, 15. September 2003 02:58 schrieb rubil:
> From: Rubil_lb@xxxxxxx
> To: hylafax-users@xxxxxxxxxxx
> Sent: Thursday, August 21, 2003 2:55 PM
> Subject: Class1.0 modem can't receive fax but it can send fax, why? help!
>
>
> Hello, everybody,
>   I come from china and my english is very poor! Excuse me!
>   Now I have some problems , I want to ask everyone.
>   My system environment is :
>     OS: RedHat Linux 9.0
>     have two fax modems : one is class2.0 ,another is class1.0 modem
>     Installed Version: Hylafax-4.1.7.tar.gz and I installed with : "
>       tar zxvf hylafax-4.1.7.tar.gz
>       cd hylafax-4.1.7
>       ./configure
>       make
>       make install
>       faxsetup
>     then with default configure except based information.
> I with the same direcotry for two modems, but have two line and telephone.
> (i.e: have two different telephone numbers). modem 1st with ttyS0 , modem
> 2nd with ttyS1 . and configure is:
> 1, The contents of /var/spool/hylafax/etc/config.ttyS0
> #
> # Generic Class 2.0 modem configuration.
> #
> # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
> #
> CountryCode:            86
> AreaCode:               XXX
> FAXNumber:            +86.XXX.XXXXXXX
> LongDistancePrefix:      0
> InternationalPrefix:       00
> DialStringRules:         etc/dialrules
> ServerTracing:           1
> SessionTracing:          11
> RecvFileMode:          0644
> LogFileMode:           0644
> DeviceMode:            0644
> RingsBeforeAnswer:      1
> SpeakerVolume:         medium
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:          TcFax1
> TagLineFont:           etc/lutRS18.pcf
> TagLineFormat:         "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:          25
> ModemType:              Class2.0        # use this to supply a hint
> #ModemRate:             19200           # max rate for DCE-DTE
> communication #ModemFlowControl:      xonxoff         # XON/XOFF flow
> control assumed #ModemSetupDTRCmd:      AT&D2           # setup so DTR drop
> resets modem #ModemSetupDCDCmd:      AT&C1           # setup so DCD
> reflects carrier (or not) Class2Cmd:              AT+FCLASS=2.0   # command
> to enter class 2.0 Class2BORCmd:           AT+FBO=0        # bit order for
> phase B/C/D (direct) Class2CQCmd:            ""              # commands to
> enable copy quality proc. Class2AbortCmd:         AT+FKS          # abort
> session command
> Class2CQQueryCmd:       AT+FCQ=?        # query for copy quality
> capabilities Class2DCCQueryCmd:      AT+FCC=?        # query for modem
> capabilities Class2TBCCmd:           AT+FPP=0        # setup stream mode
> Class2CRCmd:            AT+FCR=1        # enable capability to receive
> Class2PHCTOCmd:         AT+FCT=30       # set phase C timeout parameter
> Class2BUGCmd:           AT+FBU=1        # enable HDLC frame tracing
> Class2LIDCmd:           AT+FLI          # set local identifier command
> Class2DCCCmd:           AT+FCC          # set modem capabilities command
> Class2DISCmd:           AT+FIS          # set session parameters command
> Class2DDISCmd:          ""              # disable pre-dial DIS command hack
> Class2CIGCmd:           AT+FPI          # set polling identifier command
> Class2NRCmd:            AT+FNR=1,1,1,1  # setup status reporting command
> Class2PIECmd:           AT+FIE=0        # disable interrupt-enable command
> Class2PTSCmd:           AT+FPS          # set post-page status command
> Class2PTSQueryCmd:      AT+FPS?         # set post-page status query
> command Class2SPLCmd:           AT+FSP          # set polling indicator
> command Class2NFLOCmd:          AT+FLO=0        # set no flow control
> command Class2SFLOCmd:          AT+FLO=1        # set software flow control
> command Class2HFLOCmd:          AT+FLO=2        # set hardware flow control
> command
>
> 2. The contents of /var/spool/hylafax/etc/config.ttyS1
> #
> # Generic Class 1 modem configuration.
> #
> # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
> #
> CountryCode:            86
> AreaCode:               XXX
> FAXNumber:              +86.XXX.XXXXXXXx
> LongDistancePrefix:     0
> InternationalPrefix:    00
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> SessionTracing:         11
> RecvFileMode:           0644
> LogFileMode:            0644
> DeviceMode:             0644
> RingsBeforeAnswer:      1
> SpeakerVolume:          medium
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        TcFax2
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class1          # use this to supply a hint
> Class1Cmd:              AT+FCLASS=1     # command to enter class 1
> Class1PPMWaitCmd:       AT+FTS=7        # command to stop and wait before
> PPM Class1TCFWaitCmd:       AT+FTS=7        # command to stop and wait
> before TCF Class1EOPWaitCmd:       AT+FTS=9        # command to stop and
> wait before EOP Class1MsgRecvHackCmd:   ""      # command to avoid +FCERROR
> before image Class1TCFResponseDelay: 75              # 75ms delay between
> recv TCF & response Class1SendMsgDelay:     75              # 75ms delay
> after training Class1SwitchingCmd:     AT+FRS=7        # silence between
> HDLC recv and trans Class1TrainingRecovery: 1500            # 1.5sec delay
> after training failure Class1RecvAbortOK:      200             # wait 200ms
> for abort response Class1FrameOverhead:    4               # 4 byte
> overhead in recvd HDLC frames Class1RecvIdentTimer:   40000           #
> 35+5secs waiting for ident frames Class1TCFMaxNonZero:    10              #
> max 10% of data may be non-zero Class1TCFMinRun:        1000            #
> min run is 2/3rds of TCF duration
>
> and when I run " faxstat " , it's shown:
> [root@webserver etc]# faxstat
> HylaFAX scheduler on webserver: Running
> Modem ttyS0 (+86.XXX.XXXXXXX): Running and idle
> Modem ttyS1 (+86.XXX.XXXXXXX): Running and idle
> [root@webserver etc]#
>
> Now modem 1st(class2.0) can work normaly, but modem(class1.0) 2nd can't
> receive fax and it cant send fax out normaly. The error(
> /var/spool/hylafax/log/c00000001)is:[NO CARRIER] Why ? help me!
> Anticipating your brainchild.
> Best Regards,
> Rubil

-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions