[hylafax-users] Error in Class 2

[George Bell <gbell5@xxxxxxx>]

Hi, 

    Thanks for the input.  Since I already had a Class 2 configuration in 
/etc all ready to go, it was easy to try it again in Class 2.  It does yield 
a little more information, but if it's not enough, I'll gladly try Class 1.   
The sender at the Panasonic fax machine tries again, unsuccessfully, 
resulting in the following log, where it appears hylafax receives 79 bad 
consecutive lines, issuses a RTN, upon which the sending fax hangs up!.


Thanks,

George

Sep 07 18:35:02.22: [  785]: SESSION BEGIN 00000111 15713210207
Sep 07 18:35:02.22: [  785]: <-- [4:ATA\r]
Sep 07 18:35:16.69: [  785]: --> [5:+FCON]
Sep 07 18:35:16.69: [  785]: ANSWER: FAX CONNECTION
Sep 07 18:35:16.69: [  785]: RECV FAX: begin
Sep 07 18:35:16.69: [  785]: RECV FAX: CDPN 
Sep 07 18:35:16.69: [  785]: --> [28:+FTSI:"6098835087          "]
Sep 07 18:35:16.69: [  785]: REMOTE TSI "6098835087"
Sep 07 18:35:16.93: [  785]: --> [21:+FDCS:0,5,0,2,1,0,0,0]
Sep 07 18:35:16.93: [  785]: REMOTE wants 14400 bit/s
Sep 07 18:35:16.93: [  785]: REMOTE wants page width 1728 pixels in 215 mm
Sep 07 18:35:16.93: [  785]: REMOTE wants unlimited page length 
Sep 07 18:35:16.93: [  785]: REMOTE wants 3.85 line/mm
Sep 07 18:35:16.93: [  785]: REMOTE wants 2-D MR
Sep 07 18:35:16.93: [  785]: --> [2:OK]
Sep 07 18:35:16.93: [  785]: <-- [7:AT+FDR\r]
Sep 07 18:35:21.14: [  785]: --> [5:+FCFR]
Sep 07 18:35:23.39: [  785]: --> [7:CONNECT]
Sep 07 18:35:23.39: [  785]: RECV: begin page
Sep 07 18:35:23.39: [  785]: RECV: send trigger 021
Sep 07 18:35:23.39: [  785]: <-- data [1]
Sep 07 18:35:42.54: [  785]: RECV: 32535 bytes of data, 73 total lines
Sep 07 18:35:47.32: [  785]: RECV: 5073 bytes of data, 86 total lines
Sep 07 18:35:47.32: [  785]: --> [16:+FPTS:2,79,79,79]
Sep 07 18:35:50.24: [  785]: --> [6:+FET:0]
Sep 07 18:35:50.24: [  785]: RECV recv MPS (more pages, same document)
Sep 07 18:35:50.24: [  785]: --> [2:OK]
Sep 07 18:35:50.24: [  785]: RECV send RTN (retrain negative)
Sep 07 18:35:50.24: [  785]: <-- [7:AT+FDR\r]
Sep 07 18:35:54.31: [  785]: --> [7:+FHNG:0]
Sep 07 18:35:54.31: [  785]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Sep 07 18:35:54.31: [  785]: RECV FAX (00000111): recvq/fax00006.tif from 6098835087, route to <unspecified>, 0 pages in 0:38
Sep 07 18:35:54.31: [  785]: RECV FAX: Normal and proper end of connection
Sep 07 18:35:54.31: [  785]: RECV FAX (00000111): session with 6098835087 terminated abnormally: Normal and proper end of connection
Sep 07 18:35:54.31: [  785]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS4" "00000111" "Normal and proper end of connection" ""
Sep 07 18:35:54.56: [  785]: RECV FAX: end
Sep 07 18:35:54.56: [  785]: SESSION END