HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] multitech RTFCC and tagline



On 2003.09.03 01:53 Giulio Orsero wrote:
I see that tagline is not imaged if using MMR due to reason detailed
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=223

I have a question: as I understand it RTFCC should change compression
1d
2dmr 2dmmr on the fly depending on the remote capabilities; is this
true?

Yes.


If this is true couldn't HylaFAX just image tagline in 2dmr and have
modem
change it to 2dmmr?

Yes.


If one needs tagline for legal/or similar reasons, am I correct that
you
just need to set df capabilty to (00-01) instead of (00-01,03) (does
HylaFAX
check that before imaging in 2dmmr?)?

Yes. You could use Class2DCCQueryCmd to override the modem's AT+FCC=? response to "disable" MMR but enable RTFCC which would get things handled for taglines on outgoing faxes while still allowing for MMR support. Of course, this will only work with modems that support RTFCC. So this won't work for HylaFAX's Class 1, for example, once MMR support is complete there. (RTFCC in Class 1 is also possible and desireable, however.)


The side-effect of doing this is that HylaFAX will also be unable to *receive* in MMR. So it's harmless with outbound-only modems.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions