[hylafax-users] Problem receiving fax: possibly timeout issue?

[Ali.Naddaf@trilogy.com]

Hello everyone. 

I just installed HylaFax 4.1.5 on my SuSE 8.2. I have a Zoom/FaxModem 56K 
V.90 PCI modem (model 2920). I am trying to set it up to send and receive 
fax so I started with receiving first. Modem picks up the incoming call 
and then nothing happens. Below I have attached the log file from fax/log 
directory. Could anyone please tell me what is going wrong here?

Your help is greatly appreciated.

Please send your reply to me directly since I am not on the mailing list.
Thanks
Ali.


Jul 19 00:15:26.27: [ 9048]: SESSION BEGIN 00000025 15125551212
Jul 19 00:15:26.27: [ 9048]: HylaFAX (tm) Version 4.1.5
Jul 19 00:15:26.27: [ 9048]: MODEM set XON/XOFF/FLUSH: input ignored, 
output disabled
Jul 19 00:15:26.27: [ 9048]: <-- [4:ATA\r]
Jul 19 00:15:32.40: [ 9048]: --> [7:CONNECT]
Jul 19 00:15:32.40: [ 9048]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS4'
Jul 19 00:15:32.40: [ 9048]: STATE CHANGE: ANSWERING -> RECEIVING
Jul 19 00:15:32.40: [ 9048]: MODEM input buffering enabled
Jul 19 00:15:32.40: [ 9048]: RECV FAX: begin
Jul 19 00:15:32.40: [ 9048]: RECV FAX: CDPN 
Jul 19 00:15:32.40: [ 9048]: MODEM input buffering disabled
Jul 19 00:15:32.40: [ 9048]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76 96 
16 2E F6 72 04 04 04 04 04 04 04 04>
Jul 19 00:15:32.40: [ 9048]: <-- data [23]
Jul 19 00:15:32.40: [ 9048]: <-- data [2]
Jul 19 00:15:32.41: [ 9048]: --> [7:CONNECT]
Jul 19 00:15:32.41: [ 9048]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Jul 19 00:15:32.41: [ 9048]: <-- data [10]
Jul 19 00:15:32.41: [ 9048]: <-- data [2]
Jul 19 00:15:33.62: [ 9048]: --> [2:OK]
Jul 19 00:15:33.62: [ 9048]: <-- [9:AT+FRH=3\r]
Jul 19 00:15:33.88: [ 9048]: --> [7:CONNECT]
Jul 19 00:15:35.61: [ 9048]: --> HDLC<25:FF C0 C2 CE CE A6 4E 0A F6 66 76 
92 04 04 04 04 04 04 04 04 04 04 04 D7 3A>
Jul 19 00:15:35.61: [ 9048]: --> [2:OK]
Jul 19 00:15:35.61: [ 9048]: REMOTE TSI "InfoPress"
Jul 19 00:15:35.61: [ 9048]: <-- [9:AT+FRH=3\r]
Jul 19 00:15:35.62: [ 9048]: --> [7:CONNECT]
Jul 19 00:15:35.88: [ 9048]: --> HDLC<8:FF C8 C1 00 47 1E 36 71>
Jul 19 00:15:35.88: [ 9048]: --> [2:OK]
Jul 19 00:15:35.88: [ 9048]: REMOTE wants 14400 bit/s
Jul 19 00:15:35.88: [ 9048]: REMOTE wants page width 1728 pixels in 215 mm
Jul 19 00:15:35.88: [ 9048]: REMOTE wants unlimited page length 
Jul 19 00:15:35.88: [ 9048]: REMOTE wants 7.7 line/mm
Jul 19 00:15:35.88: [ 9048]: REMOTE wants 2-D MR
Jul 19 00:15:35.88: [ 9048]: <-- [9:AT+FRH=3\r]
Jul 19 00:15:35.89: [ 9048]: --> [7:CONNECT]
Jul 19 00:15:35.97: [ 9048]: --> [2:OK]
Jul 19 00:16:05.96: [ 9048]: MODEM TIMEOUT: reading line from modem
Jul 19 00:16:05.97: [ 9048]: MODEM <Timeout>
Jul 19 00:16:05.97: [ 9048]: RECV training at v.17 14400 bit/s
Jul 19 00:16:05.97: [ 9048]: MODEM set XON/XOFF/DRAIN: input ignored, 
output generated
Jul 19 00:16:05.97: [ 9048]: <-- [11:AT+FRM=145\r]
Jul 19 00:16:10.46: [ 9048]: --> [0:]
Jul 19 00:16:10.46: [ 9048]: MODEM <Empty line>
Jul 19 00:16:10.46: [ 9048]: MODEM TIMEOUT: receiving TCF
Jul 19 00:16:10.46: [ 9048]: <-- data [1]
Jul 19 00:16:10.47: [ 9048]: --> [2:]
Jul 19 00:16:10.47: [ 9048]: --> [2:OK]
Jul 19 00:16:10.47: [ 9048]: MODEM set XON/XOFF/DRAIN: input ignored, 
output disabled
Jul 19 00:16:10.47: [ 9048]: DELAY 75 ms
Jul 19 00:16:10.55: [ 9048]: <-- [9:AT+FTH=3\r]
Jul 19 00:16:11.41: [ 9048]: --> [7:CONNECT]
Jul 19 00:16:11.41: [ 9048]: <-- HDLC<3:FF C8 22>
Jul 19 00:16:11.41: [ 9048]: <-- data [3]
Jul 19 00:16:11.41: [ 9048]: <-- data [2]
Jul 19 00:16:11.73: [ 9048]: --> [2:OK]
Jul 19 00:16:11.73: [ 9048]: TRAINING failed
Jul 19 00:16:11.73: [ 9048]: <-- [9:AT+FRH=3\r]
Jul 19 00:16:18.73: [ 9048]: --> [0:]
Jul 19 00:16:18.73: [ 9048]: MODEM <Empty line>
Jul 19 00:16:18.73: [ 9048]: MODEM TIMEOUT: waiting for v.21 carrier
Jul 19 00:16:18.73: [ 9048]: <-- data [1]
Jul 19 00:16:18.74: [ 9048]: --> [2:]
Jul 19 00:16:18.74: [ 9048]: --> [2:OK]
Jul 19 00:16:18.74: [ 9048]: RECV FAX: Failure to train modems
Jul 19 00:16:18.74: [ 9048]: RECV FAX: end
Jul 19 00:16:18.74: [ 9048]: SESSION END

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*